Continental Structural Plastics, Inc. | Occupational Safety and Health Administration osha.gov

Violation Detail

Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).

Inspection Nr: 1311131.015

Citation: 01001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $12,934.00

Current Penalty: $12,934.00

Issuance Date: 09/27/2018

Nr Instances: 3

Nr Exposed: 6

Abatement Date: 10/09/2018

Gravity: 10

Report ID: 0524700

Contest Date:

Final Order: 10/23/2018

Related Event Code (REC):

Emphasis:

**Penalty and Failure to Abate Event History**
Type	Latest Event	Event Date	Penalty	Abatement Due Date	Citation Type	Failure to Abate Inspection
Penalty	I: Informal Settlement	10/23/2018	$12,934.00	10/09/2018	Serious
Penalty	Z: Issued	09/27/2018	$12,934.00	10/09/2018	Serious

Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: A) Continental Structural Plastics, Inc., located at 2915 County Highway 96, Carey, OH 43316: On or about April 2, 2018, the employer did not ensure that periodic inspections of the energy control procedures for the hydraulic press # 3 (Lawtomatic 1200 Ton Press; Manufacturers ID # 12001370) were conducted at least annually. Employees did not follow all the steps required for the control of the hazardous energy sources prior to changing dies in the presses. Employees were exposed to struck-by and amputation hazards while all hazardous energy sources were not controlled. B) Continental Structural Plastics, Inc., located at 2915 County Highway 96, Carey, OH 43316: On or about April 24, 2018, the employer did not ensure that periodic inspections of the energy control procedures for the hydraulic press # 9 (Williams & White 2000 Ton Press; Manufacturers ID # C-4269) were conducted at least annually. Employees did not follow all the steps required for the control of the hazardous energy sources prior to changing dies in the presses. Employees were exposed to struck-by and amputation hazards while all hazardous energy sources were not controlled. C) Continental Structural Plastics, Inc., located at 2915 County Highway 96, Carey, OH 43316: On or about April 24, 2018, the employer did not ensure that periodic inspections of the energy control procedures for the hydraulic press # 12(Williams & White 1200 Ton Press; Manufacturers ID # C-4468) were conducted at least annually. Employees did not follow all the steps required for the control of the hazardous energy sources prior to changing dies in the presses. Employees were exposed to struck-by and amputation hazards while all hazardous energy sources were not controlled.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.