Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100216 B01 Mills and calenders in the rubber and plastics industries.

Inspection Nr: 1297254.015

Citation: 01001

Citation Type: Serious

Abatement Status: Corrected During Inspection

Initial Penalty: $9,054.00

Current Penalty: $6,790.50

Issuance Date: 03/27/2018

Nr Instances: 1

Nr Exposed: 2

Abatement Date:

Gravity: 10

Report ID: 0213600

Contest Date:

Final Order: 04/19/2018

Related Event Code (REC): R

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 04/19/2018 $6,790.50   Serious  
Penalty Z: Issued 03/27/2018 $9,054.00   Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.216(b)(1): Safety trip control. A safety trip control shall be provided in front and in back of each mill. It shall be accessible and shall operate readily on contact. The safety trip control shall be one of the following types or a combination thereof: a) On or about 02/28/2018 in the production area; where the safety bar for the TWO ROLL MIXING MILL (model 360; mfg# 13126) did not operate readily when pushed up from the front (or pulled down from the back). The bar got hung up by a spring loaded collar. NO ABATEMENT CERTIFICATION REQUIRED

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close