Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1281409.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $5,174.00
Current Penalty: $891.00
Issuance Date: 03/15/2018
Nr Instances: 9
Nr Exposed: 12
Abatement Date: 04/03/2018
Gravity: 10
Report ID: 0626600
Contest Date:
Final Order: 04/06/2018
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 04/06/2018 | $891.00 | 04/03/2018 | Serious | |
Penalty | Z: Issued | 03/15/2018 | $5,174.00 | 04/03/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer does not furnish to each of his employees employment and a place of employment which are free from the recognized hazards of being struck-by which are causing or likely to cause death or serious physical harm to employees: This violation occurred on or about December 6, 2017, and times prior thereto: a. In the shop area near the #19 Puma 300L Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. b. In the shop area near the #18 Puma 300LC Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. c. In the shop area near the #15 Doosan Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. d. In the shop area near the #11 Diamond Series DMV 4020s Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. e. In the shop area near the #1 Clausing MultiTurn 4000 Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. f. In the shop area near the #3 Clausing MultiTurn 4000 Lathe where employees operated a 1/2-Ton Dayton overhead hoist that was missing the safety latch on the hook. g. In the shop area near the #14 Doosan Puma 400L Lathe where employees operated a 1/2-Ton CM Valustar overhead hoist that was missing the safety latch on the hook. h. In the shop area near the #12 Sharp SV-4020 Lathe where employees operated a 1/2-Ton CM Valustar overhead hoist that was missing the safety latch on the hook. i. In the shop area near the North wall where employees operated a 1-Ton Dayton overhead hoist that was missing the safety latch on the hook.