Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1281371.015
Citation: 01001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $19,520.00
Current Penalty: $10,735.00
Issuance Date: 01/02/2018
Nr Instances: 1
Nr Exposed: 10
Abatement Date: 01/26/2018
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 01/25/2018
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/25/2018 | $10,735.00 | 01/26/2018 | Repeat | |
| Penalty | Z: Issued | 01/02/2018 | $19,520.00 | 01/26/2018 | Repeat |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Major Metals Company on or about November 30, 2017, at the address of 844 Kockheiser Rd. Mansfield, OH: The employer failed to ensure the rotating sizing dies contained on the Tube Mill #1 Machine was adequately guarded. During a production run, an employee was exposed to amputations hazards after reaching across the sizing dies (point of operation) to apply grease to a bearing zerk. When performing this task, the operators hand/arm was within the proximity of the incoming nip point of the sizing dies. Major Metals Company was previously cited for a violation of an equivalent Occupational Safety and Health Standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 956027, citation number 2, item number 7 and was affirmed as a final order on July 29, 2014, with respect to a workplace located at 844 Kochheiser Rd. Mansfield, OH.