Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1276804.015
Citation: 01001
Citation Type: Serious
Abatement Status:
Initial Penalty: $7,391.00
Current Penalty: $0.00
Issuance Date: 04/12/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 05/17/2018
Gravity: 5
Report ID: 0522500
Contest Date: 05/07/2018
Final Order: 05/17/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/17/2019 | $0.00 | 05/17/2018 | Serious | |
| Penalty | C: Contested | 05/10/2018 | $7,391.00 | 05/17/2018 | Serious | |
| Penalty | Z: Issued | 04/12/2018 | $7,391.00 | 05/17/2018 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a. On or about 01/26/2018 in the Fabrication Area, employees were exposed to flying chips while operating the Imco Mill. The Imco Mill did not have a chip guard in place to protect employees from flying chips while steel and aluminum milling operations were performed.