Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1256043.015
Citation: 01001
Citation Type: Serious
Abatement Status:
Initial Penalty: $12,675.00
Current Penalty: $0.00
Issuance Date: 10/16/2017
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 11/20/2017
Gravity: 10
Report ID: 0728500
Contest Date: 11/15/2017
Final Order: 07/05/2018
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/05/2018 | $0.00 | 11/20/2017 | Serious | |
| Penalty | C: Contested | 11/15/2017 | $12,675.00 | 11/20/2017 | Serious | |
| Penalty | Z: Issued | 10/16/2017 | $12,675.00 | 11/20/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedures and employee training to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment would be isolated, and rendered inoperative in accordance with 29 CFR 1910.147(c)(4): Employees were exposed to amputation, crushed-by, and struck-by hazards. The employer had not developed a lock out tag out program describing energy control procedures, training, and periodic review. Feed Mill CDL Drivers were required to perform service or maintenance on equipment such as but not limited to the Warren Mega Flow Pro auger serial number 585.