Translate
Violation Detail
Standard Cited: 2200080101 2 General Duty Clause
Inspection Nr: 125415646
Citation: 01001
Citation Type: Serious
Abatement Status: I
Initial Penalty: $4,500.00
Current Penalty:
Issuance Date: 04/22/1998
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 04/27/1998
Gravity:
Report ID: 0551800
Contest Date: 06/16/1998
Final Order: 07/20/2005
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Y: State Decision | 01/17/2006 | 04/27/1998 | Serious | ||
| Penalty | J: ALJ Decision | 07/20/2005 | $4,500.00 | 04/27/1998 | Serious | |
| Penalty | Z: Issued | 04/22/1998 | $4,500.00 | 04/27/1998 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: CUTS
IC 22-8-1.1 Section 2: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Nucor Steel, Acid Regeneration Building, 5th Floor - On or about January 19, 1998, the employer did not provide a safe method for employees to transport metal plates measuring 10 feet long, 5 feet wide, 1/2 inch thick, weighing approximately 1200 pounds. Among other methods, one feasible and acceptable abatement method to correct this hazard is to cut the metal plates down to a manageable size, transporting it in a laid down position and, if needed, seam weld back together.ing