Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1252005.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,675.00
Current Penalty: $6,337.50
Issuance Date: 08/11/2017
Nr Instances: 5
Nr Exposed: 3
Abatement Date: 08/23/2017
Gravity: 10
Report ID: 0830300
Contest Date:
Final Order: 08/31/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/31/2017 | $6,337.50 | 08/23/2017 | Serious | |
| Penalty | Z: Issued | 08/11/2017 | $12,675.00 | 08/23/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about August 3, 2017 and at time prior to that date, for the employees exposed to caught-in and/or struck-by hazards where a Jet drill press, model no. JDP-125VS-3, serial no. 186223B was operated in the wet end maintenance shop at 3630 Gateway Drive, Grand Forks, North Dakota. (b) On or about July 28, 2017 and at time prior to that date, for the employees exposed to caught-in and/or struck-by hazards where a Exacto vertical milling machine, model no. 942B, serial no. 112939 was operated in the wet end maintenance shop at 3630 Gateway Drive, Grand Forks, North Dakota. (c) On or about July 28, 2017 and at time prior to that date, for the employees exposed to caught-in and/or struck-by hazards where a Jet lathe, model no. GHB-1340A, serial no. 08062048A was operated in the wet end maintenance shop at 3630 Gateway Drive, Grand Forks, North Dakota. (d) On or about July 28, 2017 and at time prior to that date, for the employees exposed to struck-by hazards where an OTC 55 ton hydraulic H-frame press was operated in the wet end maintenance shop at 3630 Gateway Drive, Grand Forks, North Dakota. (e) On or about August 3, 2017 and at time prior to that date, for the employees exposed to caught-in and/or struck-by hazards where a Delta drill press, model no. 1, serial no. 2007 33-XC was operated in the packaging maintenance shop at 3630 Gateway Drive, Grand Forks, North Dakota.