Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Viking Nailer, Turbo 505, ID #1 without written procedures to control the release of potentially hazardous energy. b. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Viking Nailer, Turbo 505, ID #2 without written procedures to control the release of potentially hazardous energy. c. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Viking Nailer, Turbo 505, ID #3 without written procedures to control the release of potentially hazardous energy. d. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Viking Nailer, Model Turbo 505, ID #5 without written procedures to control the release of potentially hazardous energy. e. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Viking Nailer, Turbo 505, ID #6 without written procedures to control the release of potentially hazardous energy. f. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining FMC Nailer, Model 423, ID #2 without written procedures to control the release of potentially hazardous energy. g. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining FMC Nailer, Model 423, ID #3 without written procedures to control the release of potentially hazardous energy. h. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #1 without written procedures to control the release of potentially hazardous energy. i. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #2 without written procedures to control the release of potentially hazardous energy. j. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #3 without written procedures to control the release of potentially hazardous energy. k. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #4 without written procedures to control the release of potentially hazardous energy. l. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #5 without written procedures to control the release of potentially hazardous energy. m. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Resaw ID #6 without written procedures to control the release of potentially hazardous energy. n. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Baker Notcher, Model BX, ID #1 without written procedures to control the release of potentially hazardous energy. o. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Baker Notcher, Model BX, ID #2 without written procedures to control the release of potentially hazardous energy. p. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Baker Notcher, Model BX, ID #3 without written procedures to control the release of potentially hazardous energy. q. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #1 without written procedures to control the release of potentially hazardous energy. r. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #2 without written procedures to control the release of potentially hazardous energy. s. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #3 without written procedures to control the release of potentially hazardous energy. t. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #4 without written procedures to control the release of potentially hazardous energy. u. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #5 without written procedures to control the release of potentially hazardous energy. v. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #6 without written procedures to control the release of potentially hazardous energy. w. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Cornell Trim Saw, Line #7 without written procedures to control the release of potentially hazardous energy. x. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Whirlwind Cutoff Saw, Model 212, ID #1 without written procedures to control the release of potentially hazardous energy. y. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Whirlwind Cutoff Saw, Model 212, ID #2 without written procedures to control the release of potentially hazardous energy. z. On or about July 17, 2017, and times prior thereto, in the Production Area, where employees were exposed to struck-by, electrical shock, and caught-in hazards when setting-up, servicing and/or maintaining Whirlwind Cutoff Saw, Model 212, ID #3 without written procedures to control the release of potentially hazardous energy.