Translate
Violation Detail
Standard Cited: 19100212 A03 I General requirements for all machines.
Inspection Nr: 1239055.015
Citation: 01001
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $12,675.00
Current Penalty: $8,875.00
Issuance Date: 08/08/2017
Nr Instances: 1
Nr Exposed: 4
Abatement Date:
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 08/30/2017
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/30/2017 | $8,875.00 | Serious | ||
| Penalty | Z: Issued | 08/08/2017 | $12,675.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(i): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefore, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle: On or about June 2, 2017, the machine guarding in place on the Pioneer #2 die press was not sufficient to prevent employees from reaching the point of operation hazard, in that, the factory installed guard on the Pioneer #2 roll press did not operate efficiently and effectively for that piece of equipment