Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1238604.015
Citation: 01001
Citation Type: Serious
Abatement Date: 07/19/2017 2
Initial Penalty: $12,548.00
Current Penalty: $7,529.00
Issuance Date: 06/29/2017
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC):
Gravity: 10
Report ID: 0626600
Contest Date: 07/26/2017
Final Order: 04/26/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 04/26/2018 | $7,529.00 | 07/19/2017 | Serious | |
| Penalty | C: Contested | 07/26/2017 | $12,548.00 | 07/19/2017 | Serious | |
| Penalty | Z: Issued | 06/29/2017 | $12,548.00 | 07/19/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. On or about June 09, 2017: a. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Hyd-Mech H-10A / serial# HSA1006075 without a developed, documented and utilized energy control procedure. b. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on HEM H105A-4/ serial# 866504 without a developed, documented and utilized energy control procedure. c. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Hyd-Mech H-10A / serial# HSA0907141 without a developed, documented and utilized energy control procedure. d. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Hem-Cyclone / serial# 1218215 without a developed, documented and utilized energy control procedure. e. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on WellSaw 1338 / serial# 1938 without a developed, documented and utilized energy control procedure. f. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Hem V100LM-3 / serial# 1241116 without a developed, documented and utilized energy control procedure. g. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Belox VM-53000SA / serial# 14A03119 without a developed, documented and utilized energy control procedure. h. In the facility where employees were exposed to struck-by and caught-by hazards, when performing service or maintenance on Threading machine # 1 without a developed, documented and utilized energy control procedure.