Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 121912901
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $6,300.00
Current Penalty: $4,528.00
Issuance Date: 03/16/2000
Nr Instances: 1
Nr Exposed: 30
Abatement Date: 04/18/2000
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order:
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/05/2000 | $4,528.00 | 04/18/2000 | Serious | |
| Penalty | Z: Issued | 03/16/2000 | $6,300.00 | 04/18/2000 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) In the front foundry, the air compressor/water room had extensive portions of its wall damaged and missing, including a 16 to 57 inch in height by 12 feet in length section of the south wall, a 4 feet in height by 2 feet in length section on the east side and a 6 feet in height by 3 feet in length section at the northwest corner, which exposed employees to struck type hazards. Among other methods, a feasible and acceptable method to correct this hazard is have the concrete block wall repaired with equivalent materials and by installing posts or railings to prevent powered industrial trucks from striking the wall.
Translate