Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1211649.015
Citation: 01001
Citation Type: Serious
Abatement Date: 03/29/2018 2
Initial Penalty: $69,713.00
Current Penalty: $36,252.00
Issuance Date: 08/09/2017
Nr Instances: 1
Nr Exposed: 15
Related Event Code (REC):
Gravity: 10
Report ID: 0627700
Contest Date: 08/30/2017
Final Order: 03/29/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | C: Contested | 04/19/2018 | $69,713.00 | 09/21/2017 | Repeat | |
| Penalty | F: Formal Settlement | 03/29/2018 | $36,252.00 | 03/29/2018 | Serious | |
| Penalty | Z: Issued | 08/09/2017 | $69,713.00 | 09/21/2017 | Repeat |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure(s) at least annually to ensure that the procedure and the requirements of this standard are being followed: The employer does not ensure a periodic evaluation of the lockout/tagout procedures with all authorized employees is performed annually for all equipment which the employee is authorized to lockout/tagout, such as, but not limited to, EMM press #43, AWT Press, coil shear, exposing employees to caught-in and struck by hazards. Polyvision Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1078749, Citation number 1, Item number 3b, and was affirmed as a final order on February 8, 2016 with a final abatement date February 8, 2016, with respect to a workplace hazard at 4301 N. Wood Drive, Okmulgee, Oklahoma 74447. Pursuant to 29 C.F.R 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that authorized employees receive a periodic inspection of the machines/equipment they are authorized to lockout/tagout.