Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
This violation item has been deleted.
Inspection Nr: 1206515.015
Citation: 01001
Citation Type: Serious
Abatement Date: 06/16/2017
Initial Penalty: $12,675.00
Current Penalty: $0.00
Issuance Date: 05/22/2017
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): R
Gravity: 10
Report ID: 0111500
Contest Date: 07/11/2017
Final Order: 05/14/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/14/2018 | $0.00 | 06/16/2017 | Serious | |
| Penalty | C: Contested | 07/13/2017 | $12,675.00 | 06/16/2017 | Serious | |
| Penalty | Z: Issued | 05/22/2017 | $12,675.00 | 06/16/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: Waterbury Location: The employer did not ensure that the Langston Die Cutter machine was equipped with an adequate guard that would prevent an employees hand from entering the machines rollers. On or about 01/30/2017, an employee sustained severe injuries which resulted in an amputation of four fingers of his dominant hand after his hand was pulled into a die cutter machine's rollers.