Translate
Violation Detail
Standard Cited: 19100212 A03 I General requirements for all machines.
Inspection Nr: 1204847.015
Citation: 01001
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $12,675.00
Current Penalty: $8,800.00
Issuance Date: 06/12/2017
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0728900
Contest Date:
Final Order: 07/06/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/06/2017 | $8,800.00 | Serious | ||
| Penalty | Z: Issued | 06/12/2017 | $12,675.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(i): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefore, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle: The employer is failing to ensure that employees are protected from amputation hazards due to a partially unguarded drill press. This violation was most recently documented at a worksite located at or near 6336 John Pershing Dr., Omaha, Nebraska 68110 on or about January 10, 2017. An employee's glove got caught in the rotating drill bit of the Delta 16 ½ inch drill press when the Allen-Bradley Guardmaster interlock device for the guard was non-operational, causing an amputation on their hand.