Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1177243.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $9,799.00
Current Penalty: $9,799.00
Issuance Date: 01/04/2017
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 03/30/2017
Gravity:
Report ID: 0522500
Contest Date:
Final Order: 01/31/2017
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/31/2017 | $9,799.00 | 03/30/2017 | Other | |
| Penalty | Z: Issued | 01/04/2017 | $9,799.00 | 01/17/2017 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle: a. On, about, and at time prior to September 14, 2016, operators in the Barrel Cell were performing service and maintenance activities on equipment, such as Mazak CNC lathes and a Radyne induction hardener machine, without authorized lockout/tagout training. There was a lack of a safety interlock on the door of CNC Lathe # 526.