Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(6)(ii): The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection: (a) K.B.P. Coil Coaters, Inc. at 3600 East 44th Avenue, Denver, CO 80216: On or before August 9, 2016, as part of injury/accident prevention responsibilities under its safety program, the employer did not ensure that at least annually a review of the complete energy control program and an inspection of all equipment or machine (LOTO) Lockout/Tagout procedures had been conducted through an evaluation certification. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection, including but not limited, to the following machines or equipment containing hazardous energy(s). The condition exposed employees to hazards associated with machines or equipment containing hazardous energy(s). 1. YODER slitter, 36-inch 2. Dahlstrom slitter, 48-inch 3. Hydraulic coil push-off ram 4. Rotating coil Mandrel re-winder