Translate
Violation Detail
Standard Cited: 19100219 M01 I Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1133334.015
Citation: 01001
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $12,471.00
Current Penalty: $0.00
Issuance Date: 09/09/2016
Nr Instances: 1
Nr Exposed: 3
Abatement Date:
Gravity: 10
Report ID: 0728900
Contest Date: 09/29/2016
Final Order: 12/28/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 12/28/2018 | $0.00 | Serious | ||
| Penalty | C: Contested | 11/08/2016 | $12,471.00 | Serious | ||
| Penalty | Z: Issued | 09/09/2016 | $12,471.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.219(m)(1)(i): Installed guards were not secured by the use of the following materials: expanded metal, perforated or solid sheet metal, wire mesh on a frame of angle iron, or iron pipe securely fastened to floor or to frame of machine: The employer is failing to protect employees from hazards such as amputation and crushing injuries by not ensuring that belt and pulley guards were properly secured. This was most recently documented at a worksite at 7940 Hayland Avenue, Prosser, Nebraska on March 15 and March 16, 2016. The expanded metal machine guards for the belt and pulley system for the sub-floor auger motors for West McPherson/Bin 31 and for East McPherson/Bin 32 were not properly secured after multiple belt change-out procedures.