Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1133003.015
Citation: 01001
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $70,000.00
Current Penalty: $70,000.00
Issuance Date: 07/08/2016
Nr Instances: 3
Nr Exposed: 4
Abatement Date: 05/19/2017
Gravity:
Report ID: 0524700
Contest Date: 07/26/2016
Final Order: 04/28/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/28/2017 | $70,000.00 | 05/19/2017 | Repeat | |
| Penalty | C: Contested | 07/27/2016 | $70,000.00 | 08/02/2016 | Willful | |
| Penalty | Z: Issued | 07/08/2016 | $70,000.00 | 08/02/2016 | Willful |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a. Materion Brush, Inc. located in Elmore, Ohio: On or about March 3, 2016, the employer did not ensure the coiler on the edge trim line was properly guarded exposing employees to an in-going nip point created between the rotating coil and the metal strip. b. Materion Brush, Inc. located in Elmore, Ohio: On or about March 3, 2016, the employer did not ensure the coil transfer car on the edge trim line was properly guarded exposing employees to crushing hazards between the coil transfer car and the mandrel containing the metal coil. c. Materion Brush, Inc. located in Elmore, Ohio: On or about March 3, 2016, the employer did not ensure the coiler on the edge trim line was properly guarded exposing employees to struck by hazards from the coiled metal.