Powered by GoogleTranslate

Violation Detail

Standard Cited: 5A0001 OSH Act General Duty Paragraph

Inspection Nr: 1108450.015

Citation: 01001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $6,300.00

Current Penalty: $6,300.00

Issuance Date: 02/02/2016

Nr Instances: 1

Nr Exposed: 1

Abatement Date: 03/06/2016

Gravity: 10

Report ID: 0830500

Contest Date:

Final Order: 02/23/2016

Related Event Code (REC): A

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 02/23/2016 $6,300.00 03/06/2016 Serious  
Penalty Z: Issued 02/02/2016 $6,300.00 03/06/2016 Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to a struck-by hazard: (a) Dinklage Feed Yard Inc, at 13946 Morgan County Road 21, Fort Morgan, CO: On and preceding 11/26/15, the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to a struck-by hazard. A John Deere model 524K front end loader operated in the mill yard, transporting ground hay, silage, and hot milled corn from piles to mixers. The mill yard was open to entry by employees from the area where the feed trucks were parked to receive a load of feed. Dust from the ground hay and steam from the milled corn were generated, reducing visibility. On 11/26/15 a feed truck operator entered the mill yard while the front end loader was operating. This condition exposed the employee to a struck-by hazard. Abatement Note: Among other methods, feasible abatement methods include: 1. Erection of barricades or installation of other engineering controls to prevent workers from entering the mill yard while heavy equipment, such as a front end loader, is operating. 2. Ensure workers are wearing high visibility clothing, for example traffic vests, where potential for struck-by hazard exists.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close