Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 109060236
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $3,000.00
Current Penalty: $3,000.00
Issuance Date: 06/07/1993
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 06/10/1993
Gravity: 10
Report ID: 0627700
Contest Date:
Final Order:
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/24/1993 | $3,000.00 | 06/10/1993 | Serious | |
| Penalty | Z: Issued | 06/07/1993 | $3,000.00 | 06/10/1993 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the tubing board: Cabot Model 2042, SN# 80073-6, truck mounted drilling rig mast; located at the repair facility was being raised into place with a tubing board not properly secured in place, and while a welder was doing repair work on the rig floor. Among other feasible and acceptable method to correct this hazard is to secure all tools and materials prior to raising the mast, and remove all tools and materials that can not be secured; and ensure that welder(s) and other personnel not required to carry out the operation are not allowed in or under the mast until it is in the fully raised position.
Translate