Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1081240.015
Citation: 01001
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,000.00
Current Penalty: $4,200.00
Issuance Date: 01/05/2016
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 02/29/2016
Gravity: 10
Report ID: 0524530
Contest Date:
Final Order: 01/22/2016
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/22/2016 | $4,200.00 | 02/29/2016 | Serious | |
| Penalty | Z: Issued | 01/05/2016 | $7,000.00 | 01/11/2016 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSHA ACT of 1970 Section 5(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee, in that employee were exposed to crushing hazards: On the north side of Frank Scott Parkway, Shiloh, Illinois, employees were exposed to equipment roll over hazards when mowing next to a ditch with a 22 degree slope with a John Deere Zero Turn Radius Mower, Model Number Z960A, Serial Number TC960AF0100086. Among other methods, one feasible and acceptable abatement method to correct this hazardous condition would be to follow the manufactures recommendations of not mowing on banks greater than 20 degrees. Such banks can be mowed by the use of string trimmers.