Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1072725.015
Citation: 01001
Citation Type: Other
Abatement Date: 08/10/2015 2
Initial Penalty: $6,000.00
Current Penalty: $6,000.00
Issuance Date: 07/15/2015
Nr Instances: 7
Nr Exposed: 3
Related Event Code (REC):
Gravity:
Report ID: 0215800
Contest Date:
Final Order: 08/05/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/05/2015 | $6,000.00 | 08/10/2015 | Other | |
| Penalty | Z: Issued | 07/15/2015 | $6,000.00 | 08/10/2015 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts: a) Machine Shop, on or about 6/23/15: Enco Lathe Model III-3540 the rotating chuck was not guarded. b) Machine Shop, on or about 6/23/15: Rockwell Drill Press was not provided with a chuck and tool guard. c) Machine Shop, on or about 6/23/15: Bridgeport Mill was not provided with a chuck and tool guard. d) Machine Shop, on or about 6/23/15: Wells Metal Cutting Band Saw was not protected with a guard on the unused portion of the blade on both the right and left side. e) Machine Shop, on or about 6/23/15: Caterpillar pipe threading machine was activated by a manually operated on/off switch that would not automatically shut the machine off should the operator be inadvertently caught up in the rotating parts. f) Maintenance Shop, on or about 6/23/15: Jet Drill Press was not provided with a chuck and tool guard. g) Triple Stack Pre-Heater Area, on or about 6/23/15: Three rotating breaks on the Triple Stack Pre-Heater were not guarded.