Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1044021.015
Citation: 01001
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $7,000.00
Current Penalty: $5,900.00
Issuance Date: 09/02/2015
Nr Instances: 16
Nr Exposed: 2
Abatement Date:
Gravity: 10
Report ID: 0215000
Contest Date:
Final Order: 10/29/2015
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/29/2015 | $5,900.00 | Serious | ||
| Penalty | Z: Issued | 09/02/2015 | $7,000.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees Location: 335 Greenwich St., New York, NY. a) Employee (a window washer) was cleaning windows at the above location from inside, and had climbed outside without fall protection and fell 5 stories to the sidewalk below; on or about 3/3/2015. Abatement note: feasible and useful method to abate the hazard is: 1. Clean exterior window surfaces from the inside of the building with employees feet placed firmly on the floor and window sill height is such to prevent the employee from falling out of the window. If an extension pole is used, train employees on the proper inspection, assembly and usage in accordance with the International Window Cleaning Association, IWCA/ANSI I 14.1-2001, section 5.1 and 5.10. 2. If cleaning windows and/or working from the floor surface is not practical, protect employees from falling through the window opening by utilizing a personal arrest system, such as, but not limited to body belt with lanyard attached to a secure point of anchorage, in accordance with ANSI/IWCA I 14.1-2001, section 3.8 (Fall Protection) and sections 9.1.1, 9.2.2 and 9.2.3. 3. Instruct all employees regarding safe working procedures and proper use of safety equipment, in accordance with ANSI/IWCA I-14.1-2001, section 3.3 and 3.4
Translate