Translate
Violation Detail
Standard Cited: 19100147 C04 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1036511.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $4,000.00
Current Penalty: $0.00
Issuance Date: 03/20/2015
Nr Instances: 6
Nr Exposed: 2
Abatement Date: 04/24/2015
Gravity:
Report ID: 0336000
Contest Date:
Final Order: 04/13/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/13/2015 | $0.00 | 04/24/2015 | Other | |
| Penalty | Z: Issued | 03/20/2015 | $4,000.00 | 04/24/2015 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): A.) Zurn Industries, LLC, 1801 Pittsburgh Avenue, Erie, PA 16502, on or about February 6, 2015 and times prior thereto: Employees perform lockout/tagout on equipment including, but not limited to, the Hitachi Seiki 2201 and 2202 Vertical CNC machines, for service and maintenance type purposes that include, but are not limited to, preventative maintenance and repairs. Specific procedural steps were not noted on the lockout/tagout procedure for pneumatic energy isolation, for the verification of pneumatic energy source isolation, and for the specific techniques for bleeding out the air to bring the door to a zero-energy state. In addition, the lockout tagout procedure did not include specific procedures / techniques for blocking the stored energy of the door when work necessitated the door to be in a raised position. B.) Zurn Industries, LLC, 1801 Pittsburgh Avenue, Erie, PA 16502, on or about February 6, 2015 and times prior thereto: Employees perform lockout/tagout on equipment including, but not limited to, a Bridgeport Torq-Cut VMC, a Cincinnati Sabre 500 and a Cincinnati Sabre 1000 VMC, for service and maintenance type purposes that include, but are not limited to, preventative maintenance and repairs. Specific procedural steps were not noted on the lockout/tagout procedure for pneumatic energy isolation, release of residual pneumatic energy, and for the verification of isolation for pneumatic energy sources. C.) Zurn Industries, LLC, 1801 Pittsburgh Avenue, Erie, PA 16502, on or about February 6, 2015 and times prior thereto: Employees perform lockout/tagout on equipment including, but not limited to, a MSK Machine, for service and maintenance type purposes that include, but are not limited to, preventative maintenance and repairs. Specific procedural steps were not noted on the lockout/tagout procedure for pneumatic energy isolation, and for the verification of isolation for pneumatic energy sources.