Powered by GoogleTranslate

Violation Detail

Standard Cited: 5A0001 OSH Act General Duty Paragraph

Inspection Nr: 103234407

Citation: 01001

Citation Type: Serious

Abatement Status: I

Initial Penalty: $4,500.00

Current Penalty: $3,000.00

Issuance Date: 10/27/1997

Nr Instances: 1

Nr Exposed: 1

Abatement Date: 10/30/1997

Gravity: 10

Report ID: 0522000

Contest Date: 11/10/1997

Final Order: 11/13/1998

Related Event Code (REC):

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty F: Formal Settlement 11/13/1998 $3,000.00 10/30/1997 Serious  
Penalty Z: Issued 10/27/1997 $4,500.00 10/30/1997 Serious  

Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY

Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that: (a)Located along the east interior area of the structure in the Billards #1 Room employee(s) were exposed to the hazards associated with falls in excess of 14' and the potential of being struck by a falling self-propelled elevating work platform while working from the elevated platform on a ramp. Among other methods feasible and acceptable to correct this hazard but are not limited to: 1.Before and during aerial lift operation, conduct an area survey for surface hazards. 2.Prior to each movement and repositioning ensure aerial platforms are operated on a surface within the limits specified by the manufacturer. 3.Maintain a safe distance and clearance from obstacles drop-offs. depressions and ramp edges. 4.Aerial platforms shall not be driven by grades sides of slopes or ramps exceeding those for which the aerial platform is rated by the manufacturer. 5.Specific to the Up-Right XL-19 manufacturers requirement. The platform is not to be elevated or the machine driven while elevated unless the aerial platform is on a firm level surface.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close