Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 103199071
Citation: 01001
Citation Type: Serious
Abatement Status: X
Initial Penalty: $350.00
Current Penalty: $350.00
Issuance Date: 06/04/1990
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 06/07/1990
Gravity: 07
Report ID: 0521400
Contest Date:
Final Order:
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/22/1990 | $350.00 | 06/07/1990 | Serious | |
| Penalty | Z: Issued | 06/04/1990 | $350.00 | 06/07/1990 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: ELECTRIC
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that on or about April 19, 1990 employees were exposed to the hazard of electric shock and/or burns when the boom of their aerial lift (Linesman II bv Hi Ranger, Serial Number 9747120) was brought into contact with a 1.2 KV overhead power lines during tree trimming/removal activity. Among other methods, one feasible and acceptable abatement method to correct this hazard is to establish and enforce a safe procedure for working near electrical lines such as that stipulated by ANSI Z133.1- 1988 "American National Standard for Tree Care Operations" as follows: Line-clearance tree trimmers and line-clearance tree-trimmer trainees shall maintain the clearances from eneraized conductors given in Table 1 ANSI Z133.1-1988. All other tree workers shall maintan a minimum clearance of 10 feet (3 meters) from energized conductors rated 50 KV phase-to-phase or less; for conductors rated over 50 KV phase-to-phase the minimum clearance shall be 10 feet + 4/10 inch (3 meters + 10 mm) for each kilovolt over 50 kv.
Translate