Text For Citation: 01 Item/Group: 001 Hazard: CAUGHT

Section 5(a)(1) of the Occupational Safety and Health Act of 1970. The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazards associated with working [IDENTIFY THE RECOGNIZED HAZARD]: (a) Warehouse Building, Ground Floor - Employee was operating a Rigid pipe threading machine which was activated by a toggle switch that would not auto- matically shut the machine off if its operator was inadvertently caught up in its rotating parts; on or about 4/24/91. ABATEMENT NOTES: Among other methods, one feasible method to reduce this hazard is to establish and enforce adequate safe operating procedures. Procedures such as those stipulated in American National Pipe Threading Machines (ANSI B208.1-1982). Elements essential to an acceptable safe operating procedure include at a minimum: (1) Installation of a momentary contact device (deadman food switch) to control power input to the machine. This device would automatically stop the machine and the rotting pipe if the operator's foot was removed from the foot switch for any reason. (2) Provide training and education to the machine operators concerning all the appropriate procedures for the safe operation and use of this type of machinery.