Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 101175065
Citation: 01001
Citation Type: Serious
Abatement Date: 10/05/1993 X
Initial Penalty: $5,000.00
Current Penalty: $2,000.00
Issuance Date: 09/30/1993
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 10
Report ID: 0316400
Contest Date: 10/22/1993
Final Order: 07/14/1994
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/14/1994 | $2,000.00 | 10/05/1993 | Serious | |
| Penalty | Z: Issued | 09/30/1993 | $5,000.00 | 10/05/1993 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: FALLING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards: a. Multiple injuries from fall hazards associated with two employees walking the web of beam 11B6 from the secured west end to the unsecured east end to make the connection to Column 1CZ; as per ANSI A10.13-1972 Section 8.2, when connectors are working in pairs, one end of steel shall be bolted before going out to connect the other end, and then only one connector shall go out to fasten the other end, on or about July 8, 1993. Among others, one feasible means of abatement would be to have one employee on steel to make connection at un-bolted end.