Violation Detail
Standard Cited: 19100304 F01 IV Wiring design and protection.
Inspection Nr: 1007766.015
Citation: 01001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/20/2014
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 12/03/2014
Gravity:
Report ID: 0626600
Contest Date:
Final Order: 12/17/2014
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 11/20/2014 | $0.00 | 12/03/2014 | Other |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were not readily accessible to each employee or authorized building management personnel: The employer does not ensure that overcurrent devices are readily accessible. This violation was observed on or about November 12, 2014, on the southeast wall of the shop where items such as, but not limited to, boxes, a table saw and vacuum were positioned in front of circuit breaker panels that powered equipment and the office. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that overcurrent devices are readily accessible.
Translate