Translate
Violation Detail
Standard Cited: 19100333 B02 Selection and use of work practices
Inspection Nr: 1601157.015
Citation: 01000E
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/26/2022
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 11/01/2022
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 10/14/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/14/2022 | $0.00 | 11/01/2022 | Serious | |
| Penalty | Z: Issued | 09/26/2022 | $0.00 | 11/01/2022 | Serious |
Text For Citation: 01 Item/Group: 000E Hazard:
29 CFR 1910.333(b)(2): "Lockout and Tagging." While any employee is exposed to contact with parts of fixed electric equipment or circuits which have been deenergized, the circuits energizing the parts shall be locked out or tagged or both in accordance with the requirements of this paragraph. The requirements shall be followed in the order in which they are presented (i.e., paragraph (b)(2)(i) first, then paragraph (b)(2)(ii), etc.). Note 1: As used in this section, fixed equipment refers to equipment fastened in place or connected by permanent wiring methods. Note 2: Lockout and tagging procedures that comply with paragraphs (c) through (f) of 1910.147 will also be deemed to comply with paragraph (b)(2) of this section provided that: [1] The procedures address the electrical safety hazards covered by this Subpart; and [2] The procedures also incorporate the requirements of paragraphs (b)(2)(iii)(D) and (b)(2)(iv)(B) of this section. During the week of May 23, 2022, at an establishment located at N1344 County Road W, in Fremont, Wisconsin; written procedures were not developed and utilized by employees when changing fuses exposing employees to electrical shock hazards.