OSHA's Nationally Recognized Testing Laboratory (NRTL) Program - Directive Compliance Extension | OSHA.gov | Occupational Safety and Health Administration

July 2, 2020

MEMORANDUM FOR:: REGIONAL ADMINISTRATORS
EXECUTIVE STAFF
FROM:: LOREN SWEATT
PRINCIPAL DEPUTY ASSISTANT SECRETARY
SUBJECT:: Extension of Some Deadlines to Comply with Revised Nationally Recognized Testing Laboratory (NRTL) Program Policies, Procedures and Guidelines Directive

This memorandum rescinds and replaces the October 19, 2019 memorandum, "Revision to Policy Impacting the Revised Nationally Recognized Testing Laboratory (NRTL) Program Policies, Procedures and Guidelines Directive." In addition to implementing other policies, the memorandum OSHA rescinds today implemented dates by which existing NRTLs would need to comply with OSHA's revision of the NRTL Program, Policies and Guidelines Directive, CPL 01-00-004 (NRTL Program Directive), effective October 1, 2019 (revised NRTL Program Directive or revised Directive, as distinguished from the prior NRTL Program Directive or old Directive). This memorandum extends some of those dates. The policies in this memorandum are otherwise the same as those contained in the rescinded memorandum. OSHA notes, however, that any Federal Register Notice establishing OSHA policies for transition to the termination of the Satellite Notification and Acceptance Program (SNAP) will supersede the policies contained in this memorandum, to the extent that there is a conflict. See 85 FR 7606 (Feb. 10, 2020) (proposed policy for transitioning to SNAP termination, available at https://www.osha.gov/sites/default/files/laws-regs/federalregister/2020-02-10_0.pdf).

The revised Directive contains some major modifications to OSHA NRTL Policies and Procedures, including:

A revision to OSHA's policy on how NRTLs can comply with the requirement in the NRTLProgram regulation at 29 CFR 1910.7(b)(3) that NRTLs be "completely independent" of employerssubject to the tested equipment requirements and of any manufacturers or vendors of equipment ormaterials being tested for these purposes. The revised policy focuses on the NRTL's ability toeffectively identify, eliminate and control any risk to its impartiality.
A revision to OSHA's policies and procedures on supplemental programs and SNAP. OSHA nolonger refers to procedures and criteria for specific programs as "supplemental programs." Instead,OSHA permits supplemental program activities (e.g., acceptance of witnessed test data, acceptanceof test data from non-independent organizations, etc.) to be part of the NRTL's management system,unless such activities are specifically excluded by the NRTL's procedures. OSHA has alsoeliminated SNAP. Under a proposed policy OSHA is considering (see 85 FR 7606 (Feb. 10, 2020)), NRTLs would be able to apply to make existing SNAP sites recognized sites. Special procedures on, and policies implementing, the new SNAP conversion policy will be finalized through a Federal Register notice.
New procedures for the acceptance of inspections and test data from organizations that function as part of the International Electrotechnical Commission System for certification to standards relating to equipment for use in Explosive Atmospheres (IECEx Scheme).
A revision to OSHA's policy on calibration to include new policies for external and internal calibration laboratories used by applicant organizations or NRTLs.

Effective immediately, OSHA is implementing two policies governing how organizations OSHA recognizes or organizations seeking OSHA recognition as a NRTL will apply for or maintain current NRTL recognition:

POLICY PERTAINING TO ORGANIZATIONS APPLYING FOR INITIAL RECOGNITION:

OSHA will evaluate pending initial applications under the revised NRTL Program Directive. Depending on the status of an application, OSHA may, in its discretion, waive certain fees associated with the application to the extent accrual of those fees are due solely to OSHA’s transition to the revised NRTL Program Directive. Assuming OSHA grants the initial application, the new NRTL will need to be in full compliance with the revised NRTL Program Directive immediately (i.e., on the date the final decision on the application is published in the Federal Register).

POLICY PERTAINING TO EXISTING NRTLs APPLYING FOR EXPANSION OF RECOGNITION:

Existing NRTLs (each organization OSHA recognizes as a NRTL on October 1, 2019) must comply with the requirements of the revised NRTL Program Directive no later than October 1, 2021. Existing NRTLs may comply with the requirements of the prior NRTL Directive (CPL-01—00-003) until September 30, 2021.
OSHA will evaluate pending expansion applications for existing NRTLs under the prior NRTL Program Directive to the extent final decisions on those applications are published in the Federal Register prior to October 1, 2021. Assuming OSHA grants the expansion application, the NRTL will need to be in full compliance with the revised NRTL Program Directive, with respect to its entire scope of recognition, no later than October 1, 2021. For example, if OSHA publishes a final decision on an expansion application in the Federal Register on September 30, 2021, then the NRTL will have to be in full compliance with the revised NRTL Program Directive, with respect to its entire scope of recognition, no later than October 1, 2021.
OSHA will evaluate pending expansion applications for existing NRTLs under the revised NRTL Program Directive to the extent final decisions on those applications are published in the Federal Register on or after October 1, 2021. Depending on the status of the application, OSHA may, in its discretion, waive certain fees associated with the application to the extent accrual of those fees are due solely to OSHA’s transition to the revised NRTL Program Directive. Assuming OSHA grants the expansion application, the NRTL will need to be in compliance with the revised NRTL Program Directive with respect to its expanded scope immediately (i.e., on the date the final decision on the expansion application is published in the Federal Register).
Audits and assessments of existing NRTLs conducted on or after October 1, 2019, will be conducted under the revised NRTL Program Directive. However, until October 1, 2021, items that OSHA would normally note as nonconformances with the revised NRTL Program Directive requiring timely response and correction will be noted as observations or long term corrective actions. While such observations and long term corrective actions will not require a response and correction in connection with the relevant audit or assessment, existing NRTLs will need to comply with the revised NRTL Program Directive no later than October 1, 2021.

If you have questions about complying with the revised NRTL Program Directive, please contact Thomas Hannigan, Acting Director, Office of Technical Programs and Coordination Activities at 202-693-2110 or hannigan.thomas@dol.gov.