# Standard Interpretations
1 - 1926.601 - OSHA construction standards applicable to specialized vehicles for hauling concrete sections in tunnel construction.
2 - 1926.601 - Does a truck with a cab containing an intergral falling object protective structure that was manufactured to meet the ISO 3449 standard conform to 29 CFR 1926.601(b)(6)?
3 - 1926.601 - Permissible methods of operating trucks in reverse on construction sites.
4 - 1926.601 - Motor vehicle requirements for a re-paving project.
5 - 1926.601 - Whether 1926.601 is applicable to personnel and burden carriers used in construction.
6 - 1926.601 - Whether 29 CFR 1926.601 prohibits an employer from leaving light duty pick-up trucks running and unattended on an off-highway jobsite.
7 - 1926.601 - Alternatives to common back-up alarms on construction motor vehicles; use of other effective technology or observers/signal persons.
8 - 1926.601 - Requirements for providing seatbelts for drivers whose size precludes their using seatbelts.
9 - 1926.601 - Clarification as to whether operators of mobile cranes with operator cabs are subject to seat belt requirements.
10 - 1926.601 - Construction standards for equipment such as Shuttle Buggy.
11 - 1926.601 - The activation of hoisting or dumping devices on haulage vehicles used in the construction industry.
12 - 1926.601 - End dump trucks on jobsites or public highways
13 - 1926.601 - Seat belts for passengers in the rear of pickup trucks.
14 - 1926.601 - Seat belts for occupants of side facing seats for off-highway vehicles.
15 - 1926.601 - Horns on construction equipment.
16 - 1926.601 - "Audible above" is a signal alarm distinguishable from the surrounding noise level.
17 - 1926.601 - Clarification of 1926.601 and 1926.602.
18 - 1926.601(a) - Clarification of application and requirements for unobstructed view for 1926.601(a).
19 - 1926.601(b)(9) - Requirements for providing seatbelts for drivers whose size precludes their using seatbelts.
20 - 1926.601(a) - Requirements for providing seatbelts for drivers whose size precludes their using seatbelts.
21 - 1926.601(a) - Clarification as to whether operators of mobile cranes with operator cabs are subject to seat belt requirements.
22 - 1926.601(b)(9) - Clarification as to whether operators of mobile cranes with operator cabs are subject to seat belt requirements.
23 - 1926.601(a) - Motor vehicle requirements for a re-paving project.
24 - 1926.601(b) - Alternatives to common back-up alarms on construction motor vehicles; use of other effective technology or observers/signal persons.
25 - 1926.601(b)(4) - Alternatives to common back-up alarms on construction motor vehicles; use of other effective technology or observers/signal persons.
26 - 1926.601(b)(4)(i) - Alternatives to common back-up alarms on construction motor vehicles; use of other effective technology or observers/signal persons.
27 - 1926.601(b)(4)(ii) - Alternatives to common back-up alarms on construction motor vehicles; use of other effective technology or observers/signal persons.
28 - 1926.601(b)(10) - Enforcement of 29 CFR 1926.601(b)(10).
29 - 1926.601(b)(11) - End dump trucks on jobsites or public highways
30 - 1926.601(b)(4) - Regulations for back-up alarms.
31 - 1926.601(b)(4) - Requirements for back up alarms.
32 - 1926.601(b)(4) - Noise and potential hazard of backup alarms on equipment at construction sites.
33 - 1926.601(b)(4) - Requirements for back-up alarms on construction vehicles.
34 - 1926.601(b)(4) - Equipment reverse signal alarms must be audible above surrounding noise level.
35 - 1926.601(b)(4)(i) - Equipment reverse signal alarms must be audible above surrounding noise level.
36 - 1926.601(b)(4)(ii) - Equipment reverse signal alarms must be audible above surrounding noise level.
37 - 1926.601(b)(4) - Permissible methods of operating trucks in reverse on construction sites.
38 - 1926.601(b)(4)(i) - Reverse signal alarms for motor vehicles.
39 - 1926.601(b)(5) - Whether 1926.601 is applicable to personnel and burden carriers used in construction.
40 - 1926.601(b)(8) - Whether 1926.601 is applicable to personnel and burden carriers used in construction.
41 - 1926.601(b)(6) - Use of cab shields on haulage vehicles with 4 ft separation between cab and dump truck body.
42 - 1926.601(b)(6) - Does a truck with a cab containing an intergral falling object protective structure that was manufactured to meet the ISO 3449 standard conform to 29 CFR 1926.601(b)(6)?
43 - 1926.601(b)(8) - Response to request for permanent variance from 1926.601(b)(8).
44 - 1926.601(b)(9) - Passenger seat belts not required on school buses