|
1
|
- 1926.404 - Whether extension cords may be repaired and returned to use.
|
|
2
|
- 1926.404 - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
|
|
3
|
- 1926.404 - Relevance of NFPA 70E industry consensus standard to OSHA requirements; whether OSHA requirements apply to owners.
|
|
4
|
- 1926.404 - CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1)
|
|
5
|
- 1926.404 - Use of approved GFCI's that do not have open-neutral protection.
|
|
6
|
- 1926.404 - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
|
|
7
|
- 1926.404 - Ground fault circuit interrupters on extension cords and portable tools.
|
|
8
|
- 1926.404 - Ground continuity monitoring devices.
|
|
9
|
- 1926.404 - Approval of Portable Generators by a qualified testing laboratory.
|
|
10
|
- 1926.404 - A Ground-Fault Circuit Interrupter may not be used in lieu of a tester or meter that can test for continuity of the equipment grounding conductor.
|
|
11
|
- 1926.404(a)(2) - Contractor shop-made extension cords.
|
|
12
|
- 1926.404(a)(2) - Acceptable job-made extension cords.
|
|
13
|
- 1926.404(a)(2) - Use of flexible cords for connection of appliances; scaffold base plates.
|
|
14
|
- 1926.404(b)(1)(ii) - Use of flexible cords for connection of appliances; scaffold base plates.
|
|
15
|
- 1926.404(b) - Possible Hazard in the Use of GFCI Worn on an Employee's Belt.
|
|
16
|
- 1926.404(b) - Ground fault protection requirements for 120-volt and/or 240-volt circuits.
|
|
17
|
- 1926.404(b)(1)(i) - Ground fault protection requirements for 120-volt and/or 240-volt circuits.
|
|
18
|
- 1926.404(b)(1)(ii) - Ground fault protection requirements for 120-volt and/or 240-volt circuits.
|
|
19
|
- 1926.404(b)(1)(i) - Use of approved GFCI's that do not have open-neutral protection.
|
|
20
|
- 1926.404(b) - Use of approved GFCI's that do not have open-neutral protection.
|
|
21
|
- 1926.404(b)(1)(ii) - Use of approved GFCI's that do not have open-neutral protection.
|
|
22
|
- 1926.404(b) - Application of 1926.404(b)(1) to 208-volt branch circuits; requirement for electrical subcontractor under 1926.404(b)(1) to provide ground-fault circuit interrupters on circuits used by other subcontractors
|
|
23
|
- 1926.404(b)(1) - Application of 1926.404(b)(1) to 208-volt branch circuits; requirement for electrical subcontractor under 1926.404(b)(1) to provide ground-fault circuit interrupters on circuits used by other subcontractors
|
|
24
|
- 1926.404(b)(1)(i) - Application of 1926.404(b)(1) to 208-volt branch circuits; requirement for electrical subcontractor under 1926.404(b)(1) to provide ground-fault circuit interrupters on circuits used by other subcontractors
|
|
25
|
- 1926.404(b)(1)(ii) - Application of 1926.404(b)(1) to 208-volt branch circuits; requirement for electrical subcontractor under 1926.404(b)(1) to provide ground-fault circuit interrupters on circuits used by other subcontractors
|
|
26
|
- 1926.404(b)(1)(iii) - Application of 1926.404(b)(1) to 208-volt branch circuits; requirement for electrical subcontractor under 1926.404(b)(1) to provide ground-fault circuit interrupters on circuits used by other subcontractors
|
|
27
|
- 1926.404(b)(1) - Extension Cords Connected to Permanent Wiring of a Construction Site Building
|
|
28
|
- 1926.404(b)(1) - Information on ground fault circuit Interrupters
|
|
29
|
- 1926.404(b)(1) - Ground Fault Circuit Interrupter Information
|
|
30
|
- 1926.404(b)(1) - Requirements for cord sets connected to permanent wiring.
|
|
31
|
- 1926.404(b)(1) - Ground-fault protection for branch circuits.
|
|
32
|
- 1926.404(b)(1) - CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1)
|
|
33
|
- 1926.404(b)(1)(i) - CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1)
|
|
34
|
- 1926.404(b)(1)(ii) - CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1)
|
|
35
|
- 1926.404(b)(1)(iii) - CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1)
|
|
36
|
- 1926.404(b)(1) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
|
|
37
|
- 1926.404(b)(1)(i) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
|
|
38
|
- 1926.404(b)(1)(ii) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
|
|
39
|
- 1926.404(b)(1)(iii) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors.
|
|
40
|
- 1926.404(b)(1)(i) - Marking recognition, regulations and policy of double insulated power tools
|
|
41
|
- 1926.404(b)(1)(i) - Ground fault protection for a construction job-site trailer.
|
|
42
|
- 1926.404(b)(1)(ii) - Proper equipment for testing ground-fault circuit interrupters (GFCIs).
|
|
43
|
- 1926.404(b)(1)(ii) - GFCI and coverplate requirements in construction;use of fall arrest systems and scaffolding.
|
|
44
|
- 1926.404(b)(1)(iii) - GFCI and coverplate requirements in construction;use of fall arrest systems and scaffolding.
|
|
45
|
- 1926.404(b)(1)(iii)(C) - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
|
|
46
|
- 1926.404(f)(7)(iv) - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
|
|
47
|
- 1926.404(f)(3) - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
|
|
48
|
- 1926.404(f)(7) - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
|
|
49
|
- 1926.404(b)(1)(iii)(C) - Whether extension cords may be repaired and returned to use.
|
|
50
|
- 1926.404(b)(1)(iii)(C) - Replacing electrical cords
|
|
51
|
- 1926.404(b)(1)(iii)(D) - Extension cord grounding continuity requirements.
|
|
52
|
- 1926.404(b)(1)(iii)(E) - Extension cord grounding continuity requirements.
|
|
53
|
- 1926.404(b)(1)(iii)(G) - Extension cord grounding continuity requirements.
|
|
54
|
- 1926.404(b)(2) - Electric power tools: grounding, NRTL approval, and suitable circuit connection.
|
|
55
|
- 1926.404(f)(7)(iv) - Electric power tools: grounding, NRTL approval, and suitable circuit connection.
|
|
56
|
- 1926.404(f)(3)(i) - Wiring, Extension Cords and Grounding.
|
|
57
|
- 1926.404(f)(7)(i) - Protection of employees from exposure to live electrical parts with plastic switch plates/receptacle cover and non-conductive screws.
|