# Standard Interpretations
1 - 1910.333(b) - Lockout of tagout requirements for electrical hazards
2 - 1910.333(b) - Lockout/tagout of electrical hazards by workers who install, maintain, repair or replace premises wiring systems.
3 - 1910.333(b) - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
4 - 1910.333(b) - Applicability of OSHA's LOTO standards; isolation and verification procedures.
5 - 1910.333(b) - Lockout/tagout: preferred means of energy isolation; non cord-and-plug powered equipment.
6 - 1910.333(b) - Qualified employee requirements for the servicing and maintenance of electrical equipment.
7 - 1910.333(b)(1) - Acceptability of using a light switch as a disconnecting means for the electrical lockout/tagout standard.
8 - 1910.333(b)(2) - Acceptability of using a light switch as a disconnecting means for the electrical lockout/tagout standard.
9 - 1910.333(b)(2) - Control of Hazardous Energy Sources (Group Lockout/Tagout).
10 - 1910.333(b)(2) - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
11 - 1910.333(b)(2)(iii)(E) - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
12 - 1910.333(b)(2) - OSHA requirements for warning signs and protection from electric-arc-flash hazards and compliance with NFPA 70E-2004.
13 - 1910.333(b)(2) - Evaluation of proposed modifications to the Bureau of Prisons' Lockout/Tagout (LOTO) procedures.
14 - 1910.333(b)(2)(v)(C) - Evaluation of proposed modifications to the Bureau of Prisons' Lockout/Tagout (LOTO) procedures.
15 - 1910.333(b)(2) - Lockout/tagout procedures, including work permits and groups of machines/equipment.
16 - 1910.333(b)(2)(iv)(B) - Verification procedures for group lockout/tagout.