1
02/08/2005
- 1910.212(a)(3) - Use of the European Norms and European Community machinery directive to comply with the 1910.212 "General [guarding] requirements for all machines."
2
02/11/2004
- 1910.212(a)(3) - Use of laser guarding systems with hydraulic press brakes
3
09/20/1994
- 1910.212(a)(3) - Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
4
01/07/1975 - 1910.212(a)(3)(ii) - Guarding by location is permitted with certain provisions.
5
12/15/1980 - 1910.212(a)(3)(ii) - Oil Rig Inspection.
6
05/26/1981 - 1910.212(a)(3)(ii) - The manner in which OSHA provides for suitable applications of the ANSI B11.3 specification standard.
7
03/25/1985 - 1910.212(a)(3)(ii) - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
8
03/25/1985 - 1910.212(a)(3)(iv)(h) - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
9
04/20/1986 - 1910.212(a)(3)(ii) - Power Press Brakes.
10
08/08/1986 - 1910.212(a)(3)(ii) - The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns)
11
11/02/1987 - 1910.212(a)(3)(ii) - Acceptable guarding for continuous cycling boneless meat tenderizers.
12
08/03/1989 - 1910.212(a)(3)(ii) - The feasibility of OSHA's machine guarding requirements in their workplace.
13
04/15/1991 - 1910.212(a)(3)(ii) - Clarification of Scope of OSHA Instruction STD 1-12.22
14
08/05/1992 - 1910.212(a)(3)(ii) - Presence Sensing Palm Button Devices (PSPBD).
15
09/20/1994 - 1910.212(a)(3)(ii) - Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
16
06/05/2001 - 1910.212(a)(3)(ii) - Use of Electro Sensitive Protection Equipment as point of operation guarding devices.
17
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
18
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
19
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
20
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
21
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
22
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
23
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
24
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
25
02/26/1999 - 1910.212(a)(3)(ii) - OSHA enforcement policy on vertical food mixers.
26
03/19/1991 - 1910.212(a)(3)(ii) - The point of operation and rotating part hazards related to vertical food mixers in bakeries and restaurants are covered by the Occupational Safety and Health Administration standards.
27
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
28
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
29
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
30
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
31
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
32
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
33
02/18/1976 - 1910.212(a)(3)(ii) - Point of operation guarding for cutters on milling machines.
34
02/18/1976 - 1910.212(a)(3)(iv) - Point of operation guarding for cutters on milling machines.
35
04/22/2005 - 1910.212(a)(3)(ii) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
36
05/14/1976 - 1910.212(a)(3)(iii) - A variance from Machine Guarding, Point of Operation Guarding.
37
08/24/2005 - 1910.212(a)(3)(iv) - Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
38
08/31/2021 - 1910.212(a)(3)(iv)(e) - Trip and Emergency Switches on Mills and Calenders
39
08/31/2021 - 1910.212(a)(3)(iv)(i) - Trip and Emergency Switches on Mills and Calenders
40
08/12/1975 - 1910.212(a)(3)(vi)(f) - Chain saw blade guard not required if it inhibits work or is a hazard.