[Federal Register Volume 89, Number 166 (Tuesday, August 27, 2024)]
[Notices]
[Pages 68656-68657]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-19163]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2006-0040]
SGS North America, Inc.: Grant of Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to expand
the scope of recognition for SGS North America, Inc., as a Nationally
Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
August 27, 2024.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor; telephone (202) 693-1999
or email meilinger.francis2@dol.gov.
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor; telephone
(202) 693-1911 or email robinson.kevin@dol.gov.
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of SGS North America, Inc., (SGS) as a NRTL. SGS's
expansion covers the addition of two test standards to the NRTL scope
of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within the
scope of recognition. Each NRTL's scope of recognition includes (1) the
type of products the NRTL may test, with each type specified by the
applicable test standard; and (2) the recognized site(s) that has/have
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope.
Recognition is not a delegation or grant of government authority;
however, recognition enables employers to use products approved by the
NRTL to meet OSHA standards that require product testing and
certification.
The agency processes applications by NRTLs or applicant
organizations for initial recognition, as well as for expansion or
renewal of recognition, following requirements in Appendix A to 29 CFR
1910.7. This appendix requires that the agency publish two notices in
the Federal Register in processing an application. In the first notice,
OSHA announces the application and provides a preliminary finding. In
the second notice, the agency provides the final decision on the
application. These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational web page
for each NRTL, including SGS, which details that NRTL's scope of
recognition. These pages are available from the OSHA website at https://www.osha.gov/dts/otpca/nrtl/index.html.
SGS submitted an application, dated October 4, 2021 (OSHA-2006-
0040-0080) to expand the NRTL scope of recognition to include two
additional test standards. OSHA staff performed a detailed analysis of
the application packet and other pertinent information. OSHA did not
perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing SGS's expansion
application in the Federal Register on July 17, 2024 (89 FR 58190). The
agency requested comments by August 1, 2024, but it received no
comments in response to this notice.
To obtain or review copies of all public documents pertaining to
the SGS application, go to http://www.regulations.gov or contact the
Docket Office, Occupational Safety and Health Administration, U.S.
Department of Labor. Docket No. OSHA-2006-0040 contains all materials
in the record concerning SGS's recognition. Contact the OSHA Docket
Office at (202) 693-2350 (TTY (877) 889-5627) for assistance in
locating docket submissions.
II. Final Decision and Order
OSHA staff examined SGS's expansion application, its capability to
meet the requirements of the test standard, and other pertinent
information. Based on its review of this evidence, OSHA finds that SGS
meets the requirements of 29 CFR 1910.7 for expansion of its
recognition, subject to the limitations and conditions listed in this
notice. OSHA, therefore, is proceeding with this final notice to grant
SGS's expanded scope of recognition. OSHA limits the expansion of SGS's
recognition to testing and certification of products for demonstration
of conformance to the test standards listed below in Table 1.
Table 1--Test Standards for Inclusion in SGS's NRTL Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 1564........................ Industrial Battery Chargers.
UL 2580........................ Batteries for Use in Electric Vehicles.
------------------------------------------------------------------------
The American National Standards Institute (ANSI) may approve the
test standard listed above as an American National Standard. However,
for convenience, we may use the designation of the standards-developing
organization for the standard as opposed to the ANSI designation. Under
the NRTL Program's policy (see OSHA Instruction CPL 01-00-004, Chapter
2, Section VIII), any NRTL recognized for a particular test standard
may use either the proprietary version of the test standard or the ANSI
version of that standard. Contact ANSI to determine whether a test
standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
SGS must abide by the following conditions of the recognition:
1. SGS must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as a NRTL, and provide details of the
change(s);
2. SGS must meet all the terms of its recognition and comply with
all OSHA policies pertaining to this recognition; and
3. SGS must continue to meet the requirements for recognition,
including all previously published conditions on SGS's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of SGS as a NRTL, subject to the limitations and
conditions specified above.
III. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393,
Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on August 20, 2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2024-19163 Filed 8-26-24; 8:45 am]
BILLING CODE 4510-26-P
