[Federal Register Volume 76, Number 209 (Friday, October 28, 2011)][Notices][Page 66996]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2011-27904]
DEPARTMENT OF LABOR
Office of the Secretary
Agency Information Collection Activities; Submission for OMB
Review; Comment Request; Forging Machines
SUMMARY: The Department of Labor (DOL) is submitting the Occupational
Safety and Health Administration (OSHA) sponsored information
collection request (ICR) titled, "Forging Machines," to the Office of
Management and Budget (OMB) for review and approval for continued use
in accordance with the Paperwork Reduction Act (PRA) of 1995 (44 U.S.C.
3501 et seq.).
DATES: Submit comments on or before November 28, 2011.
ADDRESSES: A copy of this ICR with applicable supporting documentation;
including a description of the likely respondents, proposed frequency
of response, and estimated total burden may be obtained from the
RegInfo.gov Web site, http://www.reginfo.gov/public/do/PRAMain, on the
day following publication of this notice or by contacting Michel Smyth
by telephone at (202) 693-4129 (this is not a toll-free number) or
sending an email to DOL_PRA_PUBLIC@dol.gov.
Submit comments about this request to the Office of Information and
Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor,
Occupational Safety and Health Administration (OSHA), Office of
Management and Budget, Room 10235, Washington, DC 20503, Telephone:
(202) 395-6929/Fax: (202) 395-6881 (these are not toll-free numbers),
FOR FURTHER INFORMATION CONTACT: Contact Michel Smyth by telephone at
(202) 693-4129 (this is not a toll-free number) or by email at DOL_PRA_PUBLIC@dol.gov.
SUPPLEMENTARY INFORMATION: Under regulations 29 CFR 1910.218, it is
mandatory for covered employers to conduct and to document periodic
inspections of forging machines, guards, and point-of-operation
protection devices and to mark manually controlled valves and switches.
These requirements reduce workers' risks of death or serious injury by
ensuring that forging machines used by them are in safe operating
condition and that the workers are able to identify manually operated
valves and switches.
This information collection is subject to the PRA. A Federal agency
generally cannot conduct or sponsor a collection of information, and
the public is generally not required to respond to an information
collection, unless it is approved by the OMB under the PRA and displays
a currently valid OMB Control Number. In addition, notwithstanding any
other provisions of law, no person shall generally be subject to
penalty for failing to comply with a collection of information if the
collection of information does not display a valid OMB Control Number.
See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this
information collection under OMB Control Number 1218-0228. The current
OMB approval is scheduled to expire on October 31, 2011; however, it
should be noted that existing information collection requirements
submitted to the OMB receive a month-to-month extension while they
undergo review. For additional information, see the related notice
published in the Federal Register on May 24, 2011 (76 FR 30200).
Interested parties are encouraged to send comments to the OMB,
Office of Information and Regulatory Affairs at the address shown in
the ADDRESSES section within 30 days of publication of this notice in
the Federal Register. In order to help ensure appropriate
consideration, comments should reference OMB Control Number 1218-0228.
The OMB is particularly interested in comments that:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility;
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used;
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Agency: Occupational Safety and Health Administration (OSHA).
Title of Collection: Forging Machines.
OMB Control Number: 1218-0228.
Affected Public: Private Sector--businesses or other for-profits
and not for profit institutions.
Total Estimated Number of Respondents: 27,700.
Total Estimated Number of Responses: 1,440,788.
Total Estimated Annual Burden Hours: 187,264.
Total Estimated Annual Other Costs Burden: $0.
Dated: October 24, 2011.
Departmental Clearance Officer.
[FR Doc. 2011-27904 Filed 10-27-11; 8:45 am]
BILLING CODE 4510-26-P