- Publication Date:
- Publication Type:Final Rule
- Fed Register #:60:39254-39255
- Standard Number:
- Title:Safety Standards for Fall Protection in the Construction Industry
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
29 CFR Part 1926
[Docket No. S-206B]
Safety Standards for Fall Protection in the Construction Industry
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Final rule; correcting amendment.
SUMMARY: Negotiated rulemaking is currently underway to develop a proposed revision of OSHA's standards for steel erection in subpart R of part 1926. That proposal is expected to include fall protection requirements for employees performing steel erection work. OSHA has concluded that the Agency's recently revised general requirements for fall protection (subpart M of part 1926) should be amended at this time to clarify that they do not apply to any steel erection activities. Therefore, OSHA is withdrawing amendments to subpart E which have not yet become effective and is amending certain provisions of subpart M of part 1926 in order to maintain the fall protection requirements for steel erection that were in effect before the issuance of revised subpart M.
EFFECTIVE DATE: This document is effective on August 2, 1995.
FOR FURTHER INFORMATION CONTACT: Mr. Richard Liblong, Director of Information and Consumer Affairs, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3647, 200 Constitution Avenue, NW., Washington, DC 20210. Telephone (202) 219-8151.
On August 9, 1994, the Occupational Safety and Health Administration (OSHA) issued a final rule on Fall Protection in the Construction Industry, 29 CFR part 1926, subpart M (59 FR 40672), which became effective, except as described below, on February 6, 1995. With respect to steel erection activities, the new subpart M established the duty to provide fall protection for employees engaged in steel erection in structures other than buildings (revised Secs. 1926.500(a)(2)(iii)), and 1926.501(b)) and established the fall protection systems criteria and training requirements for employees engaged in all steel erection work (revised Secs. 1926.500(a)(2)(iii), (a)(3), (a)(4), 1926.502, and 1926.503).
On October 7, 1994, five steel erection companies petitioned OSHA for an administrative stay of final subpart M to the extent the standard applies to steel erection activities. They argued that OSHA had not given fair notice that subpart M would apply to the steel erection industry at all, and that, in consequence, they did not have the opportunity to comment on this issue.
After reviewing the rulemaking record in light of petitioner's fair notice claims, OSHA agreed that the petitioners and other interested persons did not receive adequate notice of OSHA's intention that some steel erection activities would be covered by revised subpart M. Because of the notice deficiency, OSHA recognized that the rulemaking record was incomplete with respect to steel erection and that revised subpart M was not a final rule to the extent it applied to steel erection.
Accordingly, OSHA granted the request for an administrative stay and delayed the effective date of revisions to subpart M and subpart E, to the extent they applied to steel erection, until August 6, 1995 (60 FR 5131, January 26, 1995). OSHA explained in the January 1995 notice that it intended to reopen the subpart M record for supplemental comments concerning subpart M coverage of certain steel erection work. See 60 FR 5131.
For construction activity other than steel erection, revised subpart M and supporting amendments to subparts E, H, N, P, Q, and V became effective on February 6, 1995.
At the time OSHA granted the petitioners' request for an administrative stay and delayed the effective date of revised subpart M, a negotiated rulemaking committee was in the process of developing a proposal to revise 29 CFR part 1926, subpart R. Subpart R currently applies to steel erection of buildings. The Steel Erection Negotiated Rulemaking Advisory Committee, SENRAC, was expected to issue a proposal in June 1995 which would, among other things, expand subpart R's scope. In order to avoid overlap or conflict between two rulemakings concerning steel erection fall hazards, OSHA decided to wait to reopen subpart M for additional comment concerning coverage of steel erection until after SENRAC's June proposal made clear which steel erection activities would remain unregulated by subpart R. Accordingly, OSHA delayed the effective date of revisions to subpart E and subpart M purporting to apply to steel erection for six months, or until August 6, 1995 (60 FR 5131, January 26, 1995).
To date, SENRAC has not decided which steel structures will be subject to subpart R's fall protection requirements. Accordingly, OSHA has granted SENRAC additional time to develop a proposal to revise subpart R. In light of these developments, further extending the administrative stay of subpart M would prolong indefinitely the time in which the text of the standard does not reflect the standard's actual scope. OSHA has decided therefore that subpart M should be amended at this time to accurately reflect that it does not cover steel erection and that subpart E should be amended so that the generic fall protection provisions that have applied to steel erection continue in effect.
OSHA intends, after the SENRAC proposal is issued and the scope of the subpart R revision rulemaking is definite, to formally propose to amend subpart M to include any steel erection activity omitted from the subpart R revision process.
Until subparts M and R are finally revised, the Agency's enforcement policy on fall protection during steel erection is the policy outlined in Deputy Assistant Secretary Stanley's July 10, 1995 memorandum to the Office of Field Programs, "Fall Protection in Steel Erection." The memorandum provides that the term "steel erection activities" means the movement and erection of skeleton steel members (structural steel) in or on buildings or non-building structures. It includes the initial connecting of steel, employees moving point-to-point, installing metal floor or roof decking, welding, bolting and similar activities.
The memorandum further provides that steel erection does not include the erection of steel members such as lintels, stairs, railings, curtainwalls, windows, architectural metalwork, column covers, catwalks, and similar non-skeletal items or the placement of reinforcing rods in concrete structures.
Accordingly, OSHA is amending subpart M and subpart E in order to maintain, until such time as further rulemaking procedures may be initiated and completed, the fall protection requirements for steel erection that were in effect before the issuance of revised subpart M.
II. Summary and Explanation
A. Personal Protective Equipment -- Subpart E
OSHA is amending subpart E to withdraw the actions whereby the Agency removed Secs. 1926.104, Safety belts, lifelines and lanyards; 1926.105, safety nets; and 1926.107 (b), (c) and (f) (definitions for the terms "lanyard", "lifeline" and "safety belt", respectively), insofar as those provisions relate to steel erection. Through this amendment, OSHA will maintain the existing fall protection requirements for steel erection activities pending rulemaking that addresses the steel erection industry.
B. Scope and Application -- Subpart M
OSHA is amending § 1926.500(a), Scope and application, of subpart M to indicate clearly that the provisions of revised Secs. 1926.501, Duty to have fall protection; 1926.502, Fall protection systems criteria and practices; and 1926.503, Training requirements, do not apply to steel erection activities. The revised provision clearly indicates that subpart R and specified provisions of subpart E cover steel erection.
Exemption From Delayed Effective Date Requirement
Under 5 U.S.C. 553, OSHA finds that there is good cause for making this amendment effective upon publication in the Federal Register. This amendment simply maintains the fall protection requirements which have applied to the steel erection industry, notwithstanding the promulgation of subpart M, Fall protection, so it does not increase the existing regulatory burden.
This document was prepared under the direction of Joseph A. Dear, Assistant Secretary of Labor for Occupational Safety and Health, U.S. Department of Labor, 200 Constitution Avenue, N.W., Washington, D.C. 20210.
List of Subjects in 29 CFR Part 1926
Construction industry, Construction safety, Excavations, Fall protection, Hoisting safety, Occupational safety and Health, Protective equipment, Safety, Tools.
Accordingly, pursuant to sections 4, 6(b) and 8(g) of the Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, 657); section 107 of the Contract Work Hours and Safety Standards Act (40 U.S.C. 333); section 4 of the Administrative Procedure Act (5 U.S.C. 553); Secretary of Labor's Order No. 1-90 (55 FR 35736); and 29 CFR part 1911, the amendment to 29 CFR part 1926 made in the Federal Register on August 9, 1994 (59 FR 40672) is further amended as set forth below
Signed at Washington, D.C. this 28th day of July 1995.
Joseph A. Dear,
Assistant Secretary of Labor.
PART 1926 -- [AMENDED]
Subpart E -- [Amended]
1. The authority citation for subpart E of part 1926 continues to read as follows:
Authority: § 107, Contract Work Hours and Safety Standards Act (Construction Safety Act) (40 U.S.C. 333); Secs. 4, 6, 8, Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, 657); Secretary of Labor's Order No. 12-71 (36 FR 8754), 8-76 (41 FR 25059), 9-83 (48 FR 35736), or 1-90 (55 FR 9033), as applicable.
2. Amendatory items 4, 5, 6, and 7 to subpart E, published in the Federal Register issue of August 9, 1994 (59 FR 40729) and stayed in the issue of January 26, 1995 (60 FR 5131), are withdrawn.
Subpart M -- Fall Protection
3. The authority citation for subpart M of part 1926 continues to read as follows:
Authority: § 107, Contract Work Hours and Safety Standards Act (Construction Safety Act) (40 U.S.C. 333); Secs. 4, 6, 8, Occupational Safety and Health Act of 1970 (29 U.S.C. 653, 655, 657); Secretary of Labor's Order No. 1-90 (55 FR 9033); and 29 CFR Part 1911.
4. Paragraphs (a)(2)(iii), (a)(3)(iv) and (a)(4) of § 1926.500 are revised to read as follows:
1926.500 Scope, application, and definitions applicable to this subpart.
(a) * * * (2) * * * (iii) Requirements relating to fall protection for employees performing steel erection work are provided in § 1926.105 and in subpart R of this part.
* * * * *
(3) * * * (iv) Section 1926.502 does not apply to steel erection activities.
(Note: Section 1926.104 sets the criteria for body belts, lanyards and lifelines used for fall protection in steel erection activities. Paragraphs (b), (c) and (f) of § 1926.107 provide definitions for the pertinent terms).
(4) Section 1926.503 sets forth requirements for training in the installation and use of fall protection systems, except in relation to steel erection activities.
* * * * *
[FR Doc. 95-18921 Filed 8-1-95; 8:45 am]