- 14,000 High Rate Workplaces Receiving OSHA Letters (March 2007)
The Occupational Safety and Health Administration has identified and sent letters (letter07.html) to more than 14,000 workplaces with the highest occupational injury and illness rates and is urging the employers to take action to remove hazards causing the high rates.
The employers are those whose establishments are covered by Federal OSHA and reported the highest "Days Away from work, Restricted work or job Transfer injury and illness" (DART) rate to OSHA in a survey of 2005 injury and illness data. For every 100 full-time workers, the 14,000 employers had 5.3 or more injuries or illnesses which resulted in days away from work, restricted work or job transfer. The national average is 2.4.
The letter encourages employers to consider hiring an outside safety and health consultant, talking with their insurance carrier, or contacting the workers' compensation agency in their state for advice. An excellent way for employers with 250 or fewer workers to address safety and health is to ask for assistance from OSHA's on-site consultation program. The consultation program is administered by state agencies and operated separately from OSHA's inspection program. The service is free, and there are no fines even if problems are found. The letter tells the employer where the OSHA consultation program in that state may be contacted. The data collected were designed to provide establishment specific injury and illness information.
Download this file
The file is provided in Compressed Format in order to decrease download time. The compressed file is provided in plain .ZIP Archive format. In order to decompress the .ZIP file, you must have a ZIP Utility, such as PKZip® or WINZip®. If you do not have a Zip utility on your workstation, please contact your local network support group, or your internet service provider.
Viewing this file
You may use virtually any spreadsheet or database program to load this file. Simply select "dBASE" or ".dbf" as the type when loading the file into your application.
Depending upon your application, you may need to install an additional .dbf file import filter - check with the software vendor if you have any questions.
Here are a few examples of the more common applications you can use:
- Lotus Approach Database or 1-2-3 Spreadsheet
- Microsoft Access Database or Excel Spreadsheet
- WordPerfect Paradox or Quattro Pro Databases
- IBM dBASE III or any other compatible RDBMS application which can import "dBASE" files, such as Informix, Oracle, Unify, etc.