Skip to main content
Department of Labor logo
DEPARTMENT OF LABOR
A TO Z INDEX
Occupational Safety and Health Administration
A TO Z INDEX
All About OSHA (booklet)
Regional and Area Offices
File a Safety and Health Complaint
Outreach Training (10-Hour Cards)
Worker Rights Booklet
Small Business Resources
Compliance Assistance Specialists
Recordkeeping Requirements and Forms
Report a Fatality or Severe Injury
Safety and Health Program Recommendations
It's the Law Poster
Law and Regulations
Training Requirements by Standard
Open for Comment
National Emphasis Programs
Local Emphasis Programs
Oil and Gas
Safety and Health Programs
Heat Safety Campaign
More Help from OSHA
Safety and Health Topics Pages
Frequently Asked Questions
Data and Statistics
Commonly Used Statistics
High Penalties by State
Inspection Search by Establishment
Inspection Search by Number
BLS Injury/Illness Statistics
Training Requirements and Resources
Outreach Training (10- or 30- Hour Card)
The Facts About Obtaining an OSHA Card
OTI Education Centers
Harwood Training Grants
OSHA Laws & Regulations
Regulations (Standards - 29 CFR)
Regulations (Standards - 29 CFR)
By Standard Number
1926 - Table of Contents
1926 Subpart A - General
1926.1 - Purpose and scope.
1926.2 - Variances from safety and health standards.
1926.3 - Inspections - right of entry.
1926.4 - Rules of practice for administrative adjudications for enforcement of safety and health standards.
1926.5 - OMB control numbers under the Paperwork Reduction Act.
1926.6 - Incorporation by reference.
1926 Subpart B - General Interpretations
1926.10 - Scope of subpart.
1926.11 - Coverage under section 103 of the act distinguished.
1926.12 - Reorganization Plan No. 14 of 1950.
1926.13 - Interpretation of statutory terms.
1926.14 - Federal contract for "mixed" types of performance.
1926.15 - Relationship to the Service Contract Act; Walsh-Healey Public Contracts Act.
1926.16 - Rules of construction.
1926 Subpart C - General Safety and Health Provisions
1926.20 - General safety and health provisions.
1926.21 - Safety training and education.
1926.22 - Recording and reporting of injuries.
1926.23 - First aid and medical attention.
1926.24 - Fire protection and prevention.
1926.25 - Housekeeping.
1926.26 - Illumination.
1926.27 - Sanitation.
1926.28 - Personal protective equipment.
1926.29 - Acceptable certifications.
1926.30 - Shipbuilding and ship repairing.
1926.31 - [Reserved.]
1926.32 - Definitions.
1926.33 - Access to employee exposure and medical records.
1926.34 - Means of egress.
1926.35 - Employee emergency action plans.
1926 Subpart D - Authority for 1926 Subpart D
1926.50 - Medical services and first aid.
1926.50 App A - Medical services and first aid.
1926.51 - Sanitation.
1926.52 - Occupational noise exposure.
1926.53 - Ionizing radiation.
1926.54 - Nonionizing radiation.
1926.55 - Gases, vapors, fumes, dusts, and mists.
1926.55 App A - Gases, vapors, fumes, dusts, and mists.
1926.56 - Illumination.
1926.57 - Ventilation.
1926.58 - [Reserved]
1926.59 - Hazard Communication.
1926.60 - Methylenedianiline.
1926.60 App A - Substance Data Sheet, for 4-4'-METHYLENEDIANILINE
1926.60 App B - Substance Technical Guidelines, MDA
1926.60 App C - Medical Surveillance Guidelines for MDA
1926.60 App D - Sampling and Analytical Methods for MDA Monitoring and Measurement Procedures
1926.60 App E - Qualitative and Quantitative Fit Testing Procedures.
1926.61 - Retention of DOT markings, placards and labels.
1926.62 - Lead
1926.62 App A - Substance Data Sheet for Occupational Exposure to Lead
1926.62 App B - Employee Standard Summary
1926.62 App C - Medical Surveillance Guidelines
1926.62 App D - Qualitative and Quantitative Fit Test Protocols
1926.64 - Process safety management of highly hazardous chemicals.
1926.64 App A - List of Highly Hazardous Chemicals, Toxics and Reactives (Mandatory)
1926.64 App B - Block Flow Diagram and Simplified Process Flow Diagram (Nonmandatory)
1926.64 App C - Compliance Guidelines and Recommendations for Process Safety Management (Nonmandatory)
1926.64 App D - Sources of Further Information (Nonmandatory)
1926.65 - Hazardous waste operations and emergency response.
1926.65 App A - Personal Protective Equipment Test Methods
1926.65 App B - General Description and Discussion of the Levels of Protection and Protective Gear
1926.65 App C - Compliance Guidelines
1926.65 App D - References
1926.65 App E - Training Curriculum Guidelines - Non-mandatory
1926.66 - Criteria for design and construction of spray booths.
1926 Subpart E - Personal Protective and Life Saving Equipment
1926.95 - Criteria for personal protective equipment.
1926.96 - Occupational foot protection.
1926.97 - Electrical protective equipment.
1926.98 - [Reserved]
1926.99 - [Reserved]
1926.100 - Head protection.
1926.101 - Hearing protection.
1926.102 - Eye and face protection.
1926.103 - Respiratory protection.
1926.104 - Safety belts, lifelines, and lanyards.
1926.105 - Safety nets.
1926.106 - Working over or near water.
1926.107 - Definitions applicable to this subpart.
1926 Subpart F - Fire Protection and Prevention
1926.150 - Fire protection.
1926.151 - Fire prevention
1926.152 - Flammable liquids.
1926.153 - Liquefied petroleum gas (LP-Gas).
1926.154 - Temporary heating devices.
1926.155 - Definitions applicable to this subpart.
1926.156 - Fixed extinguishing systems, general.
1926.157 - Fixed extinguishing systems, gaseous agent.
1926.158 - Fire detection systems.
1926.159 - Employer alarm systems.
1926 Subpart G - Signs, Signals, and Barricades
1926.200 - Accident prevention signs and tags.
1926.201 - Signaling.
1926.202 - Barricades.
1926.203 - Definitions applicable to this subpart.
1926 Subpart H - Materials Handling, Storage, Use, and Disposal
1926.250 - General requirements for storage.
1926.251 - Rigging equipment for material handling.
1926.252 - Disposal of waste materials.
1926 Subpart I - Tools - Hand and Power
1926.300 - General requirements.
1926.301 - Hand tools.
1926.302 - Power-operated hand tools.
1926.303 - Abrasive wheels and tools.
1926.304 - Woodworking tools.
1926.305 - Jacks-lever and ratchet, screw, and hydraulic.
1926.306 - Air receivers.
1926.307 - Mechanical power-transmission apparatus.
1926 Subpart J - Welding and Cutting
1926.350 - Gas welding and cutting.
1926.351 - Arc welding and cutting.
1926.352 - Fire prevention.
1926.353 - Ventilation and protection in welding, cutting, and heating.
1926.354 - Welding, cutting, and heating in way of preservative coatings.
1926 Subpart K - Electrical
1926.400 - Introduction.
1926.401 - [Reserved]
1926.402 - Applicability.
1926.403 - General requirements.
1926.404 - Wiring design and protection.
1926.405 - Wiring methods, components, and equipment for general use.
1926.406 - Specific purpose equipment and installations.
1926.407 - Hazardous (classified) locations.
1926.408 - Special systems.
1926.409 - [Reserved]
1926.410 - [Reserved]
1926.411 - [Reserved]
1926.412 - [Reserved]
1926.413 - [Reserved]
1926.414 - [Reserved]
1926.415 - [Reserved]
1926.416 - General requirements.
1926.417 - Lockout and tagging of circuits.
1926.418 - [Reserved]
1926.419 - [Reserved]
1926.420 - [Reserved]
1926.421 - [Reserved]
1926.422 - [Reserved]
1926.423 - [Reserved]
1926.424 - [Reserved]
1926.425 - [Reserved]
1926.426 - [Reserved]
1926.427 - [Reserved]
1926.428 - [Reserved]
1926.429 - [Reserved]
1926.430 - [Reserved]
1926.431 - Maintenance of equipment.
1926.432 - Environmental deterioration of equipment.
1926.433 - [Reserved]
1926.434 - [Reserved]
1926.435 - [Reserved]
1926.436 - [Reserved]
1926.437 - [Reserved]
1926.438 - [Reserved]
1926.439 - [Reserved]
1926.440 - [Reserved]
1926.441 - Batteries and battery charging.
1926.442 - [Reserved]
1926.443 - [Reserved]
1926.444 - [Reserved]
1926.445 - [Reserved]
1926.446 - [Reserved]
1926.447 - [Reserved]
1926.448 - [Reserved]
1926.449 - Definitions applicable to this subpart.
1926 Subpart L - Scaffolds
1926.450 - Scope, application and definitions applicable to this subpart.
1926.451 - General requirements.
1926.452 - Additional requirements applicable to specific types of scaffolds.
1926.453 - Aerial lifts.
1926.454 - Training requirements.
1926 Subpart L App A - Scaffold Specifications
1926 Subpart L App B - Criteria for Determining the Feasibility of Providing Safe Access and Fall Protection for Scaffold Erectors and Dismantlers
1926 Subpart L App C - List of National Consensus Standards.
1926 Subpart L App D - List of Training Topics for Scaffold Erectors and Dismantlers.
1926 Subpart L App E - Drawings and Illustrations.
1926 Subpart M - Fall Protection
1926.500 - Scope, application, and definitions applicable to this subpart.
1926.501 - Duty to have fall protection.
1926.502 - Fall protection systems criteria and practices.
1926.503 - Training requirements.
1926 Subpart M App A - Determining Roof Widths - Non-mandatory Guidelines for Complying with 1926.501(b)(10)
1926 Subpart M App B - Guardrail Systems - Non-Mandatory Guidelines for Complying with 1926.502(b)
1926 Subpart M App C - Personal Fall Arrest Systems - Non-Mandatory Guidelines for Complying with 1926.502(d)
1926 Subpart M App D - Positioning Device Systems - Non-Mandatory Guidelines for Complying with 1926.502(e)
1926 Subpart M App E - Sample Fall Protection Plan - Non-Mandatory Guidelines for Complying with 1926.502(k)
1926 Subpart N - Helicopters, Hoists, Elevators, and Conveyors
1926.550 - [Reserved], Redesignated 1926.1501 by new standard issued August 9, 2010, in the Federal Register, 75 FR 48134
1926.551 - Helicopters.
1926.552 - Material hoists, personnel hoists, and elevators.
1926.553 - Base-mounted drum hoists.
1926.554 - Overhead hoists.
1926.555 - Conveyors.
1926.556 - Aerial lifts.
1926 Subpart O - Motor Vehicles, Mechanized Equipment, and Marine Operations
1926.600 - Equipment.
1926.601 - Motor vehicles.
1926.602 - Material handling equipment.
1926.603 - Pile driving equipment.
1926.604 - Site clearing.
1926.605 - Marine operations and equipment.
1926.606 - Definitions applicable to this subpart.
1926 Subpart P - Excavations
1926.650 - Scope, application, and definitions applicable to this subpart.
1926.651 - Specific Excavation Requirements.
1926.652 - Requirements for protective systems.
1926 Subpart P App A - Soil Classification
1926 Subpart P App B - Sloping and Benching
1926 Subpart P App C - Timber Shoring for Trenches
1926 Subpart P App D - Aluminum Hydraulic Shoring for Trenches
1926 Subpart P App E - Alternatives to Timber Shoring
1926 Subpart P App F - Selection of Protective Systems
1926 Subpart Q - Concrete and Masonry Construction
1926.700 - Scope, application, and definitions applicable to this subpart.
1926.701 - General requirements
1926.702 - Requirements for equipment and tools.
1926.703 - Requirements for cast-in-place Concrete.
1926.703 App - General Requirements for Formwork
1926.704 - Requirements for precast concrete.
1926.705 - Requirements for lift-slab operations.
1926.705 App - Lift Slab Operations
1926.706 - Requirements for masonry construction.
1926 Subpart Q App A - References to Subpart Q of Part 1926
1926 Subpart R - Steel Erection
1926.750 - Scope.
1926.751 - Definitions.
1926.752 - Site layout, site-specific erection plan and construction sequence.
1926.753 - Hoisting and rigging.
1926.754 - Structural steel assembly.
1926.755 - Column anchorage.
1926.756 - Beams and columns.
1926.757 - Open web steel joists.
1926.758 - Systems-engineered metal buildings.
1926.759 - Falling object protection.
1926.760 - Fall protection.
1926.761 - Training.
1926 Subpart R App A - Guidelines for establishing the components of a site-specific erection plan: Non-Mandatory Guidelines for Complying with 1926.752(e).
1926 Subpart R App B - [Reserved]
1926 Subpart R App C - Illustrations of Bridging Terminus Points: Non-Mandatory Guidlines for Complying with 1926.757(a)(10) and 1926.757(c)(5).
1926 Subpart R App D - Illustration of the Use of Control Lines to Demarcate Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying with 1926.760(c)(3).
1926 Subpart R App E - Training: Non-mandatory Guidelines for Complying with 1926.761.
1926 Subpart R App F - Perimeter Columns: Non-Mandatory Guidelines for Complying with 1926.756(e) To Protect the Unprotected Side or Edge of a Walking/Working Surface.
1926 Subpart R App G - 1926.502 (b)-(e) Fall Protection Systems Criteria and Practices.
1926 Subpart R App H - Double Connections: Illustration of a Clipped End Connection and a Staggered Connection: Non-Mandatory Guidelines for Complying with 1926.756(c)(1).
1926 Subpart S - Underground Construction, Caissons, Cofferdams, and Compressed Air
1926.800 - Underground Construction
1926.801 - Caissons.
1926.802 - Cofferdams.
1926.803 - Compressed air.
1926.804 - Definitions applicable to this subpart.
1926 Subpart S App A - Decompression Tables
1926 Subpart T - Demolition
1926.850 - Preparatory operations.
1926.851 - Stairs, passageways, and ladders.
1926.852 - Chutes.
1926.853 - Removal of materials through floor openings.
1926.854 - Removal of walls, masonry sections, and chimneys.
1926.855 - Manual removal of floors.
1926.856 - Removal of walls, floors, and material with equipment.
1926.857 - Storage.
1926.858 - Removal of steel construction.
1926.859 - Mechanical demolition.
1926.860 - Selective demolition by explosives.
1926 Subpart U - Blasting and the Use of Explosives
1926.900 - General provisions.
1926.901 - Blaster qualifications.
1926.902 - Surface transportation of explosives.
1926.903 - Underground transportation of explosives.
1926.904 - Storage of explosives and blasting agents.
1926.905 - Loading of explosives or blasting agents.
1926.906 - Initiation of explosive charges-electric blasting.
1926.907 - Use of safety fuse.
1926.908 - Use of detonating cord.
1926.909 - Firing the blast.
1926.910 - Inspection after blasting.
1926.911 - Misfires.
1926.912 - Underwater blasting.
1926.913 - Blasting in excavation work under compressed air.
1926.914 - Definitions applicable to this subpart.
1926 Subpart V - Electric Power Transmission and Distribution
1926.950 - General.
1926.951 - Medical services and first aid.
1926.952 - Job briefing.
1926.953 - Enclosed spaces.
1926.954 - Personal protective equipment.
1926.955 - Portable ladders and platforms.
1926.956 - Hand and portable power equipment.
1926.957 - Live-line tools.
1926.958 - Materials handling and storage.
1926.959 - Mechanical equipment.
1926.960 - Working on or near exposed energized parts.
1926.961 - Deenergizing lines and equipment for employee protection.
1926.962 - Grounding for the protection of employees.
1926.963 - Testing and test facilities.
1926.964 - Overhead lines and live-line barehand work.
1926.965 - Underground electrical installations.
1926.966 - Substations.
1926.967 - Special conditions.
1926.968 - Definitions.
1926 Subpart V App A - Appendix A to Subpart V of Part 1926 - [Reserved]
1926 Subpart V App B - Appendix B to Subpart V of Part 1926-Working on Exposed Energized Parts
1926 Subpart V App C - Appendix C to Subpart V of Part 1926-Protection From Hazardous Differences in Electric Potential
1926 Subpart V App D - Appendix D to Subpart V of Part 1926 - Methods of Inspecting and Testing Wood Poles
1926 Subpart V App E - Appendix E to Subpart V of Part 1926 - Protection From Flames and Electric Arcs
1926 Subpart V App F - Appendix F to Subpart V of Part 1926 - Work-Positioning Equipment Inspection Guidelines
1926 Subpart V App G - Appendix G to Subpart V of Part 1926 - Reference Documents
1926 Subpart W - Rollover Protective Structures; Overhead Protection
1926 Subpart W App A - Appendix A to Subpart W -- Figures W-14 through W-28
1926.1000 - Rollover protective structures (ROPS) for material handling equipment.
1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders, dozers, graders, and crawler tractors.
1926.1002 - Protective frames (roll-over protective structures, known as ROPS) for wheel-type agricultural and industrial tractors used in construction.
1926.1003 - Overhead protection for operators of agricultural and industrial tractors.
1926 Subpart X - Stairways and Ladders
1926.1050 - Scope, application, and definitions applicable to this subpart.
1926.1051 - General requirements.
1926.1052 - Stairways.
1926.1053 - Ladders.
1926.1054 - [Reserved]
1926.1055 - [Reserved]
1926.1056 - [Reserved]
1926.1057 - [Reserved]
1926.1058 - [Reserved]
1926.1059 - [Reserved]
1926.1060 - Training requirements.
1926 Subpart X App A - Ladders
1926 Subpart Y - Commercial Diving Operations
1926.1071 - Scope and application.
1926.1072 - Definitions
1926.1076 - Qualifications of dive team.
1926.1080 - Safe practices manual.
1926.1081 - Pre-dive procedures.
1926.1082 - Procedures during dive.
1926.1083 - Post-dive procedures.
1926.1084 - SCUBA diving.
1926.1085 - Surface-supplied air diving.
1926.1086 - Mixed-gas diving.
1926.1087 - Liveboating.
1926.1090 - Equipment.
1926.1091 - Recordkeeping requirements.
1926 Subpart Y App A - Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
1926 Subpart Y App B - Guidelines for Scientific Diving
1926 Subpart Z - Toxic and Hazardous Substances
1926.1100 - [Reserved]
1926.1101 - Asbestos
1926.1101 App A - OSHA Reference Method - Mandatory
1926.1101 App B - Sampling and Analysis - Non-mandatory
1926.1101 App C - Qualitative and quantitative fit testing procedures - Mandatory
1926.1101 App D - Medical questionnaires; mandatory
1926.1101 App E - Interpretation and classification of chest roentgenograms - mandatory
1926.1101 App F - Work practices and engineering controls for Class I Asbestos Operations - non-mandatory
1926.1101 App G - [Reserved]
1926.1101 App H - Substance Technical Information for Asbestos - Non-Mandatory
1926.1101 App I - Medical surveillance guidelines for asbestos, non-mandatory
1926.1101 App J - Smoking cessation program information for asbestos, non-mandatory
1926.1101 App K - Polarized Light Microscopy of Asbestos - Non-Mandatory
1926.1102 - Coal tar pitch volatiles; interpretation of term.
1926.1103 - 13 Carcinogens (4-Nitrobiphenyl, etc.).
1926.1104 - alpha-Naphthylamine.
1926.1105 - [Reserved]
1926.1106 - Methyl chloromethyl ether.
1926.1107 - 3,3'-Dichlorobenzidine (and its salts).
1926.1108 - bis-Chloromethyl ether.
1926.1109 - beta-Naphthylamine.
1926.1110 - Benzidine.
1926.1111 - 4-Aminodiphenyl.
1926.1112 - Ethyleneimine.
1926.1113 - beta-Propiolactone.
1926.1114 - 2-Acetylaminofluorene.
1926.1115 - 4-Dimethylaminoazobenzene.
1926.1116 - N-Nitrosodimethylamine.
1926.1117 - Vinyl chloride.
1926.1118 - Inorganic arsenic.
1926.1124 - Beryllium.
1926.1126 - Chromium (VI)
1926.1127 - Cadmium
1926.1127 App A - Substance Safety Data Sheet - Cadmium
1926.1127 App B - Substance Technical Guidelines for Cadmium
1926.1127 App C - Qualitative and Quantitative Fit Testing Procedures
1926.1127 App D - Occupational Health History Interview With Reference to Cadmium Exposure
1926.1127 App E - Cadmium in Workplace Atmospheres
1926.1127 App F - Nonmandatory Protocol for Biological Monitoring
1926.1128 - Benzene.
1926.1129 - Coke oven emissions.
1926.1144 - 1,2-dibromo-3-chloropropane.
1926.1145 - Acrylonitrile.
1926.1147 - Ethylene oxide
1926.1148 - Formaldehyde.
1926.1152 - Methylene Chloride.
1926.1153 - Respirable crystalline silica.
1926.1153 App A - Methods of Sample Analysis
1926.1153 App B - Medical Surveillance Guidelines
1926 Subpart Z App A - Designations for General Industry Standards Incorporated Into Body of Construction Standards
1926 Subpart AA - Confined Spaces in Construction
1926.1200 - [Reserved]
1926.1201 - Scope.
1926.1202 - Definitions.
1926.1203 - General requirements.
1926.1204 - Permit-required confined space program.
1926.1205 - Permitting process.
1926.1206 - Entry permit.
1926.1207 - Training.
1926.1208 - Duties of authorized entrants.
1926.1209 - Duties of attendants.
1926.1210 - Duties of entry supervisors.
1926.1211 - Rescue and emergency services.
1926.1212 - Employee participation.
1926.1213 - Provision of documents to Secretary.
1926 Subpart BB - [Reserved]
1926 Subpart CC - Cranes & Derricks in Construction
1926.1400 - Scope.
1926.1401 - Definitions.
1926.1402 - Ground conditions.
1926.1403 - Assembly/Disassembly--selection of manufacturer or employer procedures.
1926.1404 - Assembly/Disassembly--general requirements (applies to all assembly and disassembly operations).
1926.1405 - Disassembly--additional requirements for dismantling of booms and jibs (applies to both the use of manufacturer procedures and employer procedures).
1926.1406 - Assembly/Disassembly--employer procedures--general requirements.
1926.1407 - Power line safety (up to 350 kV)--assembly and disassembly.
1926.1408 - Power line safety (up to 350 kV)--equipment operations.
1926.1409 - Power line safety (over 350 kV).
1926.1410 - Power line safety (all voltages)--equipment operations closer than the Table A zone.
1926.1411 - Power line safety-while traveling under or near power lines with no load.
1926.1412 - Inspections.
1926.1413 - Wire rope--inspection.
1926.1414 - Wire rope--selection and installation criteria.
1926.1415 - Safety devices.
1926.1416 - Operational aids.
1926.1417 - Operation.
1926.1418 - Authority to stop operation.
1926.1419 - Signals--general requirements.
1926.1420 - Signals--radio, telephone or other electronic transmission of signals.
1926.1421 - Signals--voice signals--additional requirements.
1926.1422 - Signals--hand signal chart.
1926.1423 - Fall protection.
1926.1424 - Work area control.
1926.1425 - Keeping clear of the load.
1926.1426 - Free fall and controlled load lowering.
1926.1427 - Operator qualification and certification.
1926.1428 - Signal person qualifications.
1926.1429 - Qualifications of maintenance & repair employees.
1926.1430 - Training.
1926.1431 - Hoisting personnel.
1926.1432 - Multiple-crane/derrick lifts--supplemental requirements.
1926.1433 - Design, construction and testing.
1926.1434 - Equipment modifications.
1926.1435 - Tower cranes.
1926.1436 - Derricks.
1926.1437 - Floating cranes/derricks and land cranes/derricks on barges.
1926.1438 - Overhead & gantry cranes.
1926.1439 - Dedicated pile drivers.
1926.1440 - Sideboom cranes.
1926.1441 - Equipment with a rated hoisting/lifting capacity of 2,000 pounds or less.
1926.1442 - Severability.
1926 Subpart CC App A - Standard Hand Signals
1926 Subpart CC App B - Assembly/Disassembly--Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement
1926 Subpart CC App C - Operator Certification--Written Examination--Technical Knowledge Criteria