#	Standard Interpretations
1	04/22/2011 - 1926.760(c) - Distance at which fall protection is required for steel erection activities.
2	08/10/2010 - 1926.760(c)(3) - Acceptable equivalent to control lines for a Controlled Decking Zone (CDZ) in steel erection activities. 29 CFR 1926.760(c)(3).
3	08/03/2004 - 1926.760(c) - Use of fall protection by deaf employees performing steel erection activities.
4	12/22/2003 - 1926.760(c)(5) - Designation of an entire floor as a controlled decking zone for steel decking work.
5	12/22/2003 - 1926.760(c)(3) - Designation of an entire floor as a controlled decking zone for steel decking work.
6	12/22/2003 - 1926.760(c), 1926.760(c)(3), 1926.760(c)(5) - Designation of an entire floor as a controlled decking zone for steel decking work.
7	09/26/2003 - 1926.760(c)(3) - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
8	04/09/2003 - 1926.760(c) - OSHA standards set minimum safety and health requirements;they do not prohibit employers from adopting more stringent requirements.
9	11/08/2002 - 1926.760(c) - Applicability of the steel erection standard to repair and installation of metal roofing and roofing accessories.
10	09/18/2001 - 1926.760(c)(3) - Fall protection requirements of various construction (1926) standards.
11	09/18/2001 - 1926.760(c), 1926.760(c)(3) - Fall protection requirements of various construction (1926) standards.