1
09/03/2013
- 1926.502(f) - Fall protection for workers having to walk/work along bridge decks when the edges are finished with a 32 in. high barrier wall.
2
09/26/2003
- 1926.502(f) - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
3
11/15/2002
- 1926.502(f) - Fall protection requirements for employees, other than roofers, working on low-slope roofs
4
10/17/2000 - 1926.502(f)(1) - Clarification of when mechanical equipment can be used on sloped roofs.
5
10/17/2000 - 1926.502(f)(4) - Clarification of when mechanical equipment can be used on sloped roofs.
6
09/13/2001 - 1926.502(f)(2) - Fall protection requirements for both residential and commercial HVAC systems; clarification of confined spaces
7
11/15/2002 - 1926.502(f)(2) - Fall protection requirements for employees, other than roofers, working on low-slope roofs
8
12/15/2003 - 1926.502(f)(2) - Fall protection requirements for construction workers doing work while on a roof
9
03/12/2004 - 1926.502(f)(2) - Fall protection during roofing inspections, investigations, and assessments
10
05/12/2000 - 1926.502(f)(2) - Fall protection non-conforming guardrail criteria for application of a de minimis policy.
11
01/03/2005 - 1926.502(f)(2) - Use of a warning line instead of conventional fall protection; Part 1926 Subpart M
12
12/17/2003 - 1926.502(f)(2) - Clarification of several residential construction and fall protection issues.
13
06/19/2014 - 1926.502(f)(2) - Clarification regarding hazard access zones in steel erection
14
08/10/2010 - 1926.502(f)(2)(iv) - Acceptable equivalent to control lines for a Controlled Decking Zone (CDZ) in steel erection activities. 29 CFR 1926.760(c)(3).