# Federal Register
1 - 79:56955-56962 - Electric Power Generation, Transmission, and Distribution; Electrical Protective Equipment; Corrections - PDF
2 - 73:64202-64205 - Electrical Standard; Clarifications; Corrections - PDF
# Regulations
1 - 1910.303 - General.
# Standard Interpretations
1 - 1910.303 - Application of OSHA standards when an employer is using the "Focused Electrode Leak Locator" (FELL)
2 - 1910.303 - NRTL requirements for gas-shielded arc welding equipment.
3 - 1910.303 - Confidentiality of employee post-exposure evaluations as it pertains to the Bloodborne Pathogens Standard; use of portable fans in phlebotomy collection rooms.
4 - 1910.303 - OSHA requirements for warning signs and protection from electric-arc-flash hazards and compliance with NFPA 70E-2004.
5 - 1910.303 - Approval of employee-furnished equipment for use in hazardous locations; definition of "electric utilization equipment."
6 - 1910.303 - Use of personal cooling fans listed for "residential use only" in an industrial setting.
7 - 1910.303 - Use of temporary panelboard ingress barriers in General Industry settings.
8 - 1910.303 - Electrical conductors and equipment must be approved and used according to its listing/label.
9 - 1910.303 - Acceptability of modifying a standard on/off switch to provide lockout capability to a machine.
10 - 1910.303 - Compliance requirements for relocatable power taps or "power strips"
11 - 1910.303 - Electrical Conductor Identification.
12 - 1910.303 - Requirements for emergency eyewash stations in retail autoparts stores
13 - 1910.303 - Standard requirements for eyewash and shower equipment, personnel and other protective equipment and air circulation fans, used in an automotive battery charging area
14 - 1910.303 - Approval requirements for electrical conductors and equipment.
15 - 1910.303 - Electrical standards as it applies to desktop computers.
16 - 1910.303 - Electrical safety related work practices applicable to employees operating or working on or nearby, motor control centers in the workplace.
17 - 1910.303 - Proper wiring of a new overhead crane.
18 - 1910.303 - Requirements relating to the operation of a two-spindle reaming/drilling/threading machine in a set-up mode.
19 - 1910.303 - Electrical interface units used to connect nurse call systems with pocket page transmitters and other ancillary equipment.
20 - 1910.303 - Acceptable use of the presence sensing device
21 - 1910.303 - Control systems used for emergency evacuation are required to be listed by Underwriter's Laboratories.
22 - 1910.303 - National Electrical Manufacturers Association (NEMA) Warning Alert Regarding Imported Circuit Breaker Panels
23 - 1910.303 - Testing equipment for use in potentially hazardous environments.
24 - 1910.303 - Unapproved Plug and Socket Combination.
25 - 1910.303 - "Mr. Ouch" Labeling System.