[Federal Register Volume 85, Number 19 (Wednesday, January 29, 2020)]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-01506]
DEPARTMENT OF LABOR
Office of the Secretary
Agency Information Collection Activities; Submission for OMB
Review; Comment Request; Welding, Cutting, and Brazing Standard
ACTION: Notice of availability; request for comments.
SUMMARY: The Department of Labor (DOL) is submitting the Occupational
Safety and Health Administration (OSHA) sponsored information
collection request (ICR) titled, ``Welding, Cutting, and Brazing
Standard,'' to the Office of Management and Budget (OMB) for review and
approval for continued use, without change, in accordance with the
Paperwork Reduction Act of 1995 (PRA). Public comments on the ICR are
DATES: The OMB will consider all written comments that agency receives
on or before February 28, 2020.
ADDRESSES: A copy of this ICR with applicable supporting documentation;
including a description of the likely respondents, proposed frequency
of response, and estimated total burden may be obtained free of charge
from the RegInfo.gov website at http://www.reginfo.gov/public/do/PRAViewICR?ref_nbr=201912-1218-008 (this link will only become active
on the day following publication of this notice) or by contacting
Frederick Licari by telephone at 202-693-8073, TTY 202-693-8064, (these
are not toll-free numbers) or by email at DOL_PRA_PUBLIC@dol.gov.
Submit comments about this request by mail to the Office of
Information and Regulatory Affairs, Attn: OMB Desk Officer for DOL-
OSHA, Office of Management and Budget, Room 10235, 725 17th Street NW,
Washington, DC 20503; by Fax: 202-395-5806 (this is not a toll-free
number); or by email: OIRA_submission@omb.eop.gov. Commenters are
encouraged, but not required, to send a courtesy copy of any comments
by mail or courier to the U.S. Department of Labor--OASAM, Office of
the Chief Information Officer, Attn: Departmental Information
Compliance Management Program, Room N1301, 200 Constitution Avenue NW,
Washington, DC 20210; or by email: DOL_PRA_PUBLIC@dol.gov.
FOR FURTHER INFORMATION CONTACT: Frederick Licari by telephone at 202-
693-8073, TTY 202-693-8064, (these are not toll-free numbers) or by
email at DOL_PRA_PUBLIC@dol.gov.
SUPPLEMENTARY INFORMATION: This ICR seeks to extend PRA authority for
the Welding, Cutting, and Brazing Standard information collection.
Regulation 29 CFR 1910.255(e) requires that qualified maintenance
personnel and a certification record generated and maintained make a
periodic inspection of resistance welding equipment. The certification
shall include the date of the inspection, the signature of the person
who performed the inspection and the serial number, or other
identifier, for the equipment inspected. The maintenance inspection
ensures that welding equipment is in safe operating condition, while
the maintenance record provides evidence that employers performed the
required inspections. The Occupational Safety and Health Act sections
2(b)(3) and 8(c) authorize this information collection. See 29 U.S.C.
This information collection is subject to the PRA. A Federal agency
generally cannot conduct or sponsor a collection of information, and
the public is generally not required to respond to an information
collection, unless the OMB under the PRA approves it and displays a
currently valid OMB Control Number. In addition, notwithstanding any
other provisions of law, no person shall generally be subject to
penalty for failing to comply with a collection of information that
does not display a valid Control Number. See 5 CFR 1320.5(a) and
1320.6. The DOL obtains OMB approval for this information collection
under Control Number 1218-0207.
OMB authorization for an ICR cannot be for more than three (3)
years without renewal, and the current approval for this collection is
scheduled to expire on January 31, 2020. The DOL seeks to extend PRA
authorization for this information collection for three (3) more years,
without any change to existing requirements. The DOL notes that
existing information collection requirements submitted to the OMB
receive a month-to-month extension while they undergo review. For
additional substantive information about this ICR, see the related
notice published in the Federal Register on November 21, 2019 (84 FR
Interested parties are encouraged to send comments to the OMB,
Office of Information and Regulatory Affairs at the address shown in
the ADDRESSES section within thirty-(30) days of publication of this
notice in the Federal Register. In order to help ensure appropriate
consideration, comments should mention OMB Control Number 1218-0207.
The OMB is particularly interested in comments that:
Evaluate whether the proposed collection of information is
necessary for the proper performance of the functions of the agency,
including whether the information will have practical utility:
Evaluate the accuracy of the agency's estimate of the
burden of the proposed collection of information, including the
validity of the methodology and assumptions used.
Enhance the quality, utility, and clarity of the
information to be collected; and
Minimize the burden of the collection of information on
those who are to respond, including through the use of appropriate
automated, electronic, mechanical, or other technological collection
techniques or other forms of information technology, e.g., permitting
electronic submission of responses.
Title of Collection: Welding, Cutting, and Brazing Standard.
OMB Control Number: 1218-0207.
Affected Public: Private Sector--businesses or other for-profits.
Total Estimated Number of Respondents: 20,627.
Total Estimated Number of Responses: 82,508.
Total Estimated Annual Time Burden: 5,501 hours.
Total Estimated Annual Other Costs Burden: $20,627.
Authority: 44 U.S.C. 3507(a)(1)(D).
Dated: January 23, 2020.
Departmental Clearance Officer.
[FR Doc. 2020-01506 Filed 1-28-20; 8:45 am]
BILLING CODE 4510-26-P