[Federal Register: August 24, 2010 (Volume 75, Number 163)][Notices]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0037]
Welding, Cutting and Brazing Standard; Extension of the Office of
Management and Budget's (OMB) Approval of Information Collection
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comment.
SUMMARY: OSHA solicits comments concerning its proposal to extend the
Office of Management and Budget's (OMB) approval of the information
collection requirements contained in the Welding, Cutting and Brazing
Standard (29 CFR part 1910, subpart Q). The information collected is
used by employers and workers whenever welding, cutting and brazing are
performed. The purpose of the information is to ensure that employers
evaluate hazards associated with welding and ensure that adequate
measures are taken to make the process safe.
DATES: Comments must be submitted (postmarked, sent, or received) by
October 25, 2010.
Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
Facsimile: If your comments, including attachments, are not longer
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit three copies of your comments
and attachments to the OSHA Docket Office, Docket No. OSHA-2010-0037,
U.S. Department of Labor, Occupational Safety and Health
Administration, Room N-2625, 200 Constitution Avenue, NW., Washington,
DC 20210. Deliveries (hand, express mail, messenger, and courier
service) are accepted during the Department of Labor's and Docket
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA
docket number for the Information Collection Request (ICR) (Docket No.
OSHA-2010-0037). All comments, including any personal information you
provide, are placed in the public docket without change, and may be
made available online at http://www.regulations.gov. For further
information on submitting comments see the "Public Participation"
heading in the section of this notice titled "Supplementary
Docket: To read or download comments or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the http://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download through the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue, NW., Washington, DC 20210; telephone (202)
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and
OSHA's estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
Section 1910.255(e) requires that a periodic inspection of
resistance welding equipment be made by qualified maintenance
personnel, and that a certification record be generated and maintained.
The certification shall include the date of the inspection, the
signature of the person who performed the inspection and the serial
number, or other identifier, for the equipment inspected. The record
shall be made available to an OSHA inspector upon request. The
maintenance inspection ensures that welding equipment is in safe
operating condition while the maintenance record provides evidence to
workers and Agency compliance officers that employers performed the
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirements contained in the Standard on Welding, Cutting
and Brazing (29 CFR part 1910, subpart Q). The Agency is requesting to
reduce its current burden hour estimate associated with this Standard
from 5,994 hours to 5,935 hours for a total reduction of 59 hours. The
reduction is a result of a decrease in the estimated number of
resistance welders. The Agency will summarize any comments submitted in
response to this notice and will include this summary in the request to
Type of Review: Extension of a currently approved collection.
Title: Welding, Cutting and Brazing (29 CFR part 1910, subpart Q).
OMB Number: 1218-0207.
Affected Public: Business or other for-profits.
Number of Respondents: 42,328.
Frequency: On occasion; Semiannually.
Average Time per Response: Varies from 1 minute (.02 hour) to
maintain the inspection certification record to 7 minutes (.12 hour) to
perform the inspection and to generate and maintain the inspection
Estimated Total Burden Hours: 5,935.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0037). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at http://www.regulations.gov.
Therefore, OSHA cautions commenters about submitting personal
information such as social security numbers and date of birth.
Although all submissions are listed in the http://www.regulations.gov index,
some information (e.g., copyrighted material) is not publicly
available to read or download through this website.
All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the http://www.regulations.gov website to submit comments and
access the docket is available at the Web site's "User Tips" link.
Contact the OSHA Docket Office for information about materials not
available through the Web site, and for assistance in using the
Internet to locate docket submissions.
V. Authority and Signature
David Michaels, PhD, MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 5-2007
(67 FR 31160).
Signed at Washington, DC, on August 16, 2010.
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2010-21055 Filed 8-23-10; 8:45 am]
BILLING CODE 4510-26-P