[Federal Register: August 11, 2010 (Volume 75, Number 154)][Notices]
[Page 48726-48728]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr11au10-93]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0026]
Mechanical Power Presses Standard; Extension of the Office of
Management and Budget's (OMB) Approval of the Information Collection
(Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comment.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits comments concerning its proposal to extend the
Office of Management and Budget's (OMB) approval of the information
collection requirements contained in the Mechanical Power Presses
Standard for General Industry (29 CFR 1910.217(e)(1)).
DATES: Comments must be submitted (postmarked, sent, or received) by
October 12, 2010.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit three copies of your comments
and attachments to the OSHA Docket Office, Docket No. OSHA-2010-0026,
U.S. Department of Labor, Occupational Safety and Health
Administration, Room N-2625, 200 Constitution Avenue, NW., Washington,
DC 20210. Deliveries (hand, express mail, messenger, and courier
service) are accepted during the Department of Labor's and Docket
Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA
docket number for the Information Collection Request (ICR) (OSHA-2010-
0026). All comments, including any personal information you provide,
are placed in the public docket without change, and may be made
available online at http://www.regulations.gov. For further information
on submitting comments see the "Public Participation" heading in the
section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to http://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the http://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download through the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may contact Theda Kenney at the
address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue, NW., Washington, DC 20210; telephone (202)
693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657).
The collections of information contained in the Mechanical Power
Presses Standard for General Industry are necessary to reduce workers'
risk of death or serious injury by ensuring that employers maintain the
mechanical power presses used by the workers in safe operating
condition.
The following section describes who uses the information collected
under each requirement, as well as how they use it.
Section 1910.217(e)(1)(i)
Paragraph (e)(1)(i) requires employers to establish and follow a
program of periodic and regular inspections of power presses to ensure
that all their parts, auxiliary equipment, and safeguards are in safe
operating condition and adjustment. Employers must maintain a
certification record of inspections that includes the date of
inspection, the signature of the person who performed the inspection,
and the serial number, or other identifiers, of the power press that
was inspected.
Section 1910.217(e)(1)(ii)
Paragraph (e)(1)(ii) requires employers to inspect and test each
press no less than weekly to determine the condition of the clutch/
brake mechanism, antirepeat feature, and single-stroke mechanism.
Employers must perform and complete necessary maintenance or repair or
both before the press is operated. In addition, employers must maintain
a record of inspections, tests, and maintenance work. The record must
include the date of the inspection, test, or maintenance; the signature
of the person who performed the inspection, test, or maintenance; and
the serial number, or other identifiers, of the press that was
inspected, tested, or maintained.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirements contained in the Mechanical Power Presses
Standard for General Industry (29 CFR 1910.217(e)(1). There are no
program changes or adjustments associated with the information
collection requirements of the Standard; thus, the burden hours will
remain at 1,373,054. The Agency will summarize the comments submitted
in response to this notice and will include this summary in the request
to OMB.
Type of Review: Extension of a currently approved collection.
Title: Mechanical Power Presses (29 CFR 1910.217(e)(1)).
OMB Number: 1218-0229.
Affected Public: Business or other for-profits; Federal Government;
State, Local, or Tribal Government.
Number of Respondents: 295,000.
Frequency of Response: On occasion, Weekly, Monthly.
Average Time per Response: Two minutes (.03 hour) to disclose the
certification records to 20 minutes (.33 hour) to inspect the parts,
auxiliary equipment, and safeguards of each press.
Estimated Total Burden Hours: 1,373,054.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at http://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0026). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at http://www.regulations.gov.
Therefore, OSHA cautions commenters about submitting personal
information such as social security numbers and date of birth.
Although all submissions are listed in the http://www.regulations.gov index,
some information (e.g., copyrighted material)is not publicly
available to read or download through this Web site.
All submissions, including copyrighted material, are
available for inspection and copying at the OSHA Docket Office.
Information on using the http://www.regulations.gov Web site to submit
comments and access the docket is available at the Web site's "User
Tips" link. Contact the OSHA Docket Office for information about
materials not available through the Web site, and for assistance in
using the Internet to locate docket submissions.
V. Authority and Signature
David Michaels, PhD, MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 5-2007
(72 FR 31160).
Signed at Washington, DC, this 6th day of August 2010.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2010-19790 Filed 8-10-10; 8:45 am]
BILLING CODE 4510-26-P