- Publication Date:
- Publication Type:Notice
- Fed Register #:66:36333-36334
- Standard Number:
- Title:MET Laboratories, Inc., Application for Expansion of Recognition
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. NRTL1-88]
MET Laboratories, Inc., Application for Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
SUMMARY: This notice announces the application of MET Laboratories, Inc., for expansion of its recognition as a Nationally Recognized Testing Laboratory under 29 CFR 1910.7, and presents the Agency's preliminary finding. This preliminary finding does not constitute an interim or temporary approval of the application.
DATES: Comments submitted by interested parties, or any request for extension of the time to comment, must be received no later than July 26, 2001.
ADDRESSES: Submit written comments concerning this notice to: Docket Office, Docket NRTL1-88, U.S. Department of Labor, Occupational Safety and Health Administration, Room N2625, 200 Constitution Avenue, NW, Washington, DC 20210; telephone: (202) 693-2350. Commenters may transmit written comments of 10 pages or less in length by facsimile to (202) 693-1648. Submit request for extensions concerning this notice to: Office of Technical Programs and Coordination Activities, NRTL Program, Occupational Safety and Health Administration, U.S. Department of Labor, Room N3653, 200 Constitution Avenue, NW, Washington, DC 20210.
FOR FURTHER INFORMATION CONTACT: Bernard Pasquet, Office of Technical Programs and Coordination Activities, NRTL Program, Room N3653 at the above address, or phone (202) 693-2110.
Notice of Application
The Occupational Safety and Health Administration (OSHA) hereby gives notice that MET Laboratories, Inc. (MET), has applied for expansion of its current recognition as a Nationally Recognized Testing Laboratory (NRTL). MET's expansion request covers the use of additional test standards.
OSHA recognition of an NRTL signifies that the organization has met the legal requirements in Section 1910.7 of Title 29, Code of Federal Regulations (29 CFR 1910.7). Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, OSHA can accept products "properly certified" by the NRTL.
The Agency processes applications by an NRTL for initial recognition or for expansion or renewal of this recognition following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on an application. These notices set forth the NRTL's scope of recognition or modifications of this scope. MET's current scope of recognition may be found in OSHA's informational web page for the NRTL (http://www.osha.gov/dts/otpca/nrtl/met.html).
The most recent notices published by OSHA for MET's recognition covered an expansion for additional standards, which OSHA announced on November 10, 1998 (63 FR 63085) and granted on March 9, 1999 (64 FR 11502).
The current address of the MET testing facility already recognized by OSHA is: MET Laboratories, Inc., 914 West Patapsco Avenue, Baltimore, Maryland 21230.
General Background on the Application
MET has submitted a request, dated January 16, 2001 (see Exhibit 24), to expand its recognition as an NRTL for additional test standards. The NRTL Program staff has determined that all the standards requested are "appropriate test standards," within the meaning of 29 CFR 1910.7(c). The staff makes such determinations in processing expansion requests from any NRTL.
OSHA recognition of any NRTL for a particular test standard is limited to equipment or materials (i.e., products) for which OSHA standards require third party testing and certification before use in the workplace. Consequently, an NRTL's scope of recognition excludes any product(s) falling within the scope of the test standard for which OSHA has no testing and certification requirements. MET seeks recognition for testing and certification of products to demonstrate compliance with the following 32 standards.
UL 45 Portable Electric Tools
UL 506 Specialty Transformers
UL 745-1 Portable Electric Tools
UL 745-2-1 Particular Requirements of Drills
UL 745-2-2 Particular Requirements for Screwdrivers and Impact Wrenches
UL 745-2-3 Particular Requirements for Grinders, Polishers, and Disk-Type Sanders
UL 745-2-4 Particular Requirements for Sanders
UL 745-2-5 Particular Requirements for Circular Saws and Circular Knives
UL 745-2-6 Particular Requirements for Hammers
UL 745-2-8 Particular Requirements for Shears and Nibblers
UL 745-2-9 Particular Requirements for Tappers
UL 745-2-11 Particular Requirements for Reciprocating Saws
UL 745-2-12 Particular Requirements for Concrete Vibrators
UL 745-2-14 Particular Requirements for Planers
UL 745-2-17 Particular Requirements for Routers and Trimmers
UL 745-2-30 Particular Requirements for Staplers
UL 745-2-31 Particular Requirements for Diamond Core Drills
UL 745-2-32 Particular Requirements for Magnetic Drill Presses
UL 745-2-33 Particular Requirements for Portable Bandsaws
UL 745-2-34 Particular Requirements for Strapping Tools
UL 745-2-35 Particular Requirements for Drain Cleaners
UL 745-2-36 Particular Requirements for Hand Motor Tools
UL 745-2-37 Particular Requirements for Plate Jointers
UL 935 Fluorescent-Lamp Ballasts
UL 1026 Electric Household Cooking and Food Serving Appliances
UL 1028 Hair Clipping and Shaving Appliances
UL 1083 Household Electric Skillets and Frying-Type Appliances
UL 1236 Battery Chargers for Charging Engine-Starter Batteries
UL 1431 Personal Hygiene and Health Care Appliances
UL 1585 Class 2 and Class 3 Transformers
UL 1786 Nightlights
UL 1993 Self-Ballasted Lamps and Lamp Adapters
The designations and titles of the above test standards were current at the time of the preparation of this notice.
Many of the Underwriters Laboratories (UL) test standards listed in this notice are also approved as American National Standards by the American National Standards Institute (ANSI). However, for convenience in compiling the lists, we use the designation of the standard developing organization (e.g., UL 1028) for the standard, as opposed to the ANSI designation (e.g., ANSI/UL 1028). Under our procedures, an NRTL recognized for an ANSI-approved test standard may use either the latest proprietary version of the test standard or the latest ANSI version of that standard, regardless of whether it is currently recognized for the proprietary or ANSI version. Contact ANSI or the ANSI web site (http://www.ansi.org) and click "NSSN" to find out whether or not a test standard is currently ANSI-approved.
Preliminary Finding on the Application
MET has submitted an acceptable request for expansion of its recognition as an NRTL. In connection with this request, OSHA did not perform an on-site review of MET's NRTL testing facilities. However, NRTL Program assessment staff reviewed information pertinent to the request and recommended that MET's recognition be expanded to include the additional test standards listed above (see Exhibit 25).
Following a review of the application file, the assessor's recommendation, and other pertinent documents, the NRTL Program staff has concluded that OSHA should grant to MET the expansion of recognition as an NRTL to use the additional test standards listed above. The staff, therefore, recommended to the Assistant Secretary that the application be preliminarily approved.
Based upon the recommendations of the staff, the Agency has made a preliminary finding that the MET Laboratories, Inc., can meet the requirements, as prescribed by 29 CFR 1910.7, for the expansion of recognition. This preliminary finding does not constitute an interim or temporary approval of the application.
OSHA welcomes public comments, in sufficient detail, as to whether MET has met the requirements of 29 CFR 1910.7 for expansion of its recognition as a Nationally Recognized Testing Laboratory. Your comment should consist of pertinent written documents and exhibits. To consider it, OSHA must receive the comment at the address provided above (see ADDRESSES) no later than the last date for comments (see DATES above). Should you need more time to comment, OSHA must receive your written request for extension at the address provided above (also see ADDRESSES) no later than the last date for comments (also see DATES above). You must include your reason(s) for any request for extension. OSHA will limit an extension to 15 days unless the requester justifies a longer period. We may deny a request for extension if it is frivolous or otherwise unwarranted. You may obtain or review copies of MET's request, the recommendation on the expansion, and all submitted comments, as received, by contacting the Docket Office, Room N2625, Occupational Safety and Health Administration, U.S. Department of Labor, at the above address. You should refer to Docket No. NRTL-1-88, the permanent record of public information on MET's recognition.
The NRTL Program staff will review all timely comments, and after resolution of issues raised by these comments, will recommend whether to grant MET's expansion request. The Agency will make the final decision on granting the expansion, and in making this decision, may undertake other proceedings that are prescribed in Appendix A to 29 CFR Section 1910.7. OSHA will publish a public notice of this final decision in the Federal Register.
Signed at Washington, D.C. this 25th day of June , 2001.
R. Davis Layne,
Acting Assistant Secretary.
[FR Doc. 01-17402 Filed 7-10-01; 8:45 am]
BILLING CODE 4510-26-P