- Publication Date:
- Publication Type:Notice
- Fed Register #:62:37626-37627
- Standard Number:
- Title:Agency Information Collection Activities; Proposed Collection;Comment Request; Restraining Devices for Servicing Large Vehicle Multi-piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv))-- Manufacturer's Certification of Structural or Welding Repairs
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. ICR-97-32]
Agency Information Collection Activities; Proposed Collection; Comment Request; Restraining Devices for Servicing Large Vehicle Multi- piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)) -- Manufacturer's Certification of Structural or Welding Repairs
SUMMARY: The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden conducts a preclearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and/or continuing collections of information in accordance with the Paperwork Reduction Act of 1995 (PRA 95) (44 U.S.C. 3506(c)(2)(A)). This program helps to ensure that requested data can be provided in the desired format, reporting burden (time and financial resources) is minimized, collection instruments are clearly understood, and impact of collection requirements on respondents can be properly assessed. Currently, the Occupational Safety and Health Administration (OSHA) is soliciting comments concerning the proposed approval of the information collection requirements contained at 29 CFR 1910.177(d)(3)(iv). The Agency is particularly interested in comments which:
- Evaluate whether the proposed collection of information is necessary for the proper performance of the functions of the Agency, including whether the information will have practical utility;
- Evaluate the accuracy of the Agency's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used;
- Enhance the quality, utility, and clarity of the information to be collected; and
- Minimize the burden of the collection of information on those who are to respond, including through the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submissions of responses.
DATES: Written comments must be submitted on or before September 12, 1997.
ADDRESSES: Comments are to be submitted to the Docket Office, Docket No. ICR-97-32, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210. Telephone: (202) 219-7894. Written comments limited to 10 pages or less in length may also be transmitted by facsimile to (202) 219-5046.
FOR FURTHER INFORMATION CONTACT: Richard Sauger, Directorate of Safety Standards Programs, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3605, 200 Constitution Avenue, NW., Washington, DC 20210. Telephone: (202) 219-7202, Ext. 137. Copies of the referenced information collection request are available for inspection and copying in the Docket Office and will be mailed to persons who request copies by telephoning Theda Kennedy at (202) 219- 8061, ext. 100, or Barbara Bielaski at (202) 219-8076, ext. 142. For electronic copies of the Information Collection Request on the certification provision of Servicing Multi-piece and Single Piece Rim Wheels, contact OSHA's WebPage on the Internet at http://www.osha.gov/ and click on "standards."
The Occupational Safety and Health Act of 1970 (the Act) authorizes the promulgation of such health and safety standards as are necessary or appropriate to provide safe or healthful employment and places of employment. The statute specifically authorizes information collection by employers as necessary or appropriate for the enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents.
The inspection certification records required in 29 CFR 1910.177(d)(3)(iv) are necessary to assure compliance with the requirement for multi-piece and single piece rim wheels. Included in that standard is a requirement for the employer to ensure that restraining devices and barriers (restraining devices or restraints) are used when large vehicle tires are inflated. Each device is required to be inspected prior to each day's use and after any accident. Any restraining device that is damaged must be immediately removed from service. Any damaged restraining device that has been removed from service. Any damaged restraining device that has been removed from service cannot be reused until it is repaired and reinspected. When the repairs require component replacement or rewelding, the repaired device must be certified by the manufacturer or a registered professional engineer as meeting the strength requirements of 29 CFR 1910.177(d)(3)(iv).
II. Current Actions
This notice requests an extension of the current Office of Management and Budget (OMB) approval of the inspection certification requirement contained in 29 CFR 1910.177(d)(3)(iv) -- Servicing Multi- piece and Single Piece Rim Wheels (currently approved under OMB Control No. 1218-0210).
Type of Review: Extension.
Agency: U.S. Department of Labor, Occupational Safety and Health Administration.
Title: Servicing Multi-piece and Single Piece Rim Wheels.
OMB Number: 1218.
Agency Number: ICR-37-32.
Affected Public: State of local governments; Business or other for- profit.
Number of Respondents: 80.
Estimated Total Burden Hours: 6 hours.
Total Annualized Capital/Startup Costs: $0.
Signed at Washington, D.C., this 7th day of July 1997.
John F. Martonik,
Acting Director, Directorate of Safety Standards Programs.
[FR Doc. 97-18401 Filed 7-11-97; 8:45 am)