Group Sampling Information
Sampling Media Sampling Time
(If there are exceptions they will be in Notes)
TWA Sampling Volume
(If there are exceptions they will be in Notes)
TWA Flow Rate
(If there are exceptions they will be in Notes)
mixed cellulose ester filter (MCEF) 240-480 min 480-960 L 2 L/min
Analytes Sampling Information
Analytes IMIS Code Wipe Sampling Incompatibilities
Iron* I200 Yes, with a Ghost Wipe
Vanadium* V125 Yes, with a Ghost Wipe
Zinc* Z100 Yes, with a Ghost Wipe
Chromium, Metal & Insoluble salts (as Cr)** 0685 Yes, with a Ghost Wipe Hexavalent Chromium
Cobalt, Metal, Dust & Fume (as Co) 0720 Yes, with a Ghost Wipe Tungsten
Copper Dust & Mists (as Cu) 0730 Yes, with a Ghost Wipe
Copper Fume (as Cu) 0731 Yes, with a Ghost Wipe
Iron Oxide Fume 1520 Yes, with a Ghost Wipe
Manganese, Compounds & Fume (as Mn)*** 1620 Yes, with a Ghost Wipe
Molybdenum, Dust & Insoluble compounds, (as Mo) 1790 Yes, with a Ghost Wipe
Nickel, Metal, & Insoluble compounds (as Ni) 1840 Yes, with a Ghost Wipe
Vanadium, Respirable Dust & Fume 2571 Yes, with a Ghost Wipe
Zinc Oxide Fume 2610 Contact SLTC for information
Notes

Request any or all of these analytes together. Entire group can be requested with analyte code 2587.

Results for unrequested analytes in this group will be reported if significant amount are found.

There is no need to contact SLTC before sampling.

This analysis can be pre-analyzed gravimetrically if collected on a pre-weighted PVC filter obtained from SLTC.

*These 3 codes are used for bulk sample results in place of their metal oxides.

**Please note that this is NOT hexavalent chromium.

***For Manganese STEL take only a 10-30 L sample.